1 / 1
MX5 NC (Miata Mk3) Phone holder bracket - 17mm with screw hole — zdjęcie 1

MX5 NC (Miata Mk3) Phone holder bracket - 17mm with screw hole

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original design kept breaking after vibrations, even in ABS 100% filled. This has an hole to reinforce with a screw.

Ocena
0 / 5
Polubienia
5
Pobrania
19
Wydruki
0
Wyświetlenia
204
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an improved version with an hole. Use an M3 x 30 screw and press-fit a M3x4 bushing on the opposite side to keep the screw in place.

Original design kept failing after vibrations due to the phone weight (I have an iPhone 16 with magsafe mount).

Gcode is for ender 3 s1 pro, with abs settings 100% infill.

Tagi