1 / 3
PCV hose adapter for silicone elbow NC MX5 Miata — zdjęcie 1
1 / 3

PCV hose adapter for silicone elbow NC MX5 Miata

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connect the PCV breather hose to a silicone intake using the OEM connectors

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Open Community License v1

Description:

I got myself a silicone intake elbow to do a sound tube delete on my NC2, and needed something to connect the breather hose to the elbow. This worked amazingly and has been on the car for a few months now without any issues.

I have also included the hose clamp model you can see on the pictures, it takes a M6x30 bolt (with nut and washer) to secure everything in place

There is a MX5 logo on the base. I recommend putting some spray paint on this face and sanding it back to smooth for maximum style points

Material and printing

You will need something that can resist the heat of an engine bay. 
ASA or ABS are my recommendations (mine is printed in ASA)

You could also use PA, PC or other high temp materials but it seems overkill here

I tried my best to design so that it doesn't need support, but there is one small section that still does, as pictured in red here:

Install instructions

Use a small flat blase screwdriver or a pick to disconnect the intake side of the PCV hose by pressing on the latches. There is a small ring on the connector that will need to be reused (green in my case). Remove and install on the breather hose adapter.
Slide the bhose clamp on top of the intake elbow, install the adapter, and connect the breather hose

All done, go enjoy!