PCV hose adapter for silicone elbow NC MX5 Miata
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connect the PCV breather hose to a silicone intake using the OEM connectors
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Open Community License v1
Description:
I got myself a silicone intake elbow to do a sound tube delete on my NC2, and needed something to connect the breather hose to the elbow. This worked amazingly and has been on the car for a few months now without any issues.
I have also included the hose clamp model you can see on the pictures, it takes a M6x30 bolt (with nut and washer) to secure everything in place
There is a MX5 logo on the base. I recommend putting some spray paint on this face and sanding it back to smooth for maximum style points
Material and printing
You will need something that can resist the heat of an engine bay.
ASA or ABS are my recommendations (mine is printed in ASA)
You could also use PA, PC or other high temp materials but it seems overkill here
I tried my best to design so that it doesn't need support, but there is one small section that still does, as pictured in red here:

Install instructions
Use a small flat blase screwdriver or a pick to disconnect the intake side of the PCV hose by pressing on the latches. There is a small ring on the connector that will need to be reused (green in my case). Remove and install on the breather hose adapter.
Slide the bhose clamp on top of the intake elbow, install the adapter, and connect the breather hose
All done, go enjoy!
