1 / 4
Brackets for Suzuki Cappuccino washer in Mazda Miata MX5
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets for mounting a Suzuki Cappuccino washer bottle in a Mazda Miata MX5
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 2315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (61)Powiązane
I advice printing it in PETG or ABS. not sure how long PLA wil last or if it gets hot at all.
hardware needed:
- 1x M6x1.0 40mm
- 3x M6x1.0 20mm
- 4x M6 nuts
- 9x M6 washers
installation can be a bit tedious because you cant really acces the inner bolt on the bottle very well
see: https://revlimiter.net/blog/2011/02/nopro-washer-bottle/ for more details