Gasoline Funnel (Offset center) - MX5 Miata NB & Others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Offset center Gasoline Funnel that I designed for my MX5 NB. It fits other cars and applications.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a gasoline funnel for my Mazda MX5. Most of the relatively big funnels are centered hole, but due to to the fuel door at the left, I could only use a very small funnel while refuelling the car. This would create a mess and would spill gasoline outside. So I designed this big funnel, with offset center.
I printed it in PLA and have been using it 50+ times for more than 5 months now without a problem. I printed it initially in a 310x310 bed printer, but I included the solidworks project so you can resize it down as you need. If you don't have/know how to use solidworks, just put it in the slicer large side down, and dip it downwards until it fits your printer.