1 / 1
U-Shaped Washers (Spacers) for ND Miata Trunk Lid Popper from MX5things — zdjęcie 1

U-Shaped Washers (Spacers) for ND Miata Trunk Lid Popper from MX5things

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer for the MX5things ND Miata Trunk Lid Popper mod

Ocena
0 / 5
Polubienia
1
Pobrania
22
Wydruki
0
Wyświetlenia
189
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

A couple of years ago I purchased the MX5things Trunk Lid Popper mod for my ND Miata. I recently noticed the trunk lid did not sit flush, and that MX5things sells U-shaped washers to solve the issue. Via email, Sergey said that any 0.05" (~1.27mm) thickness washer should work.

I tried washers of both 1.5mm and 2mm thickness and found that I preferred 2mm. I've uploaded both versions.

The bolt hole has a diameter of 6mm and the outer diameter of the washer is 30mm.

Tagi