Power Brick/SSD Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just another under desk power brick/SSD mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Just another power brick holder/SSD holder. I wanted one that was big enough for the largest brick I have, but I could use for the smallest as well. I put in lots of holes for zip ties.
The power brick inside measurements are 125mm x 60mm and the SSD inside measurements 130mm x 83mm. The small zip tie holes are 6mm x 2mm and the large zip tie holes are 8mm x 2.75mm . I've included the Fusion 360 CAD file along with other formats to make it easier to adapt to other needs. The large zip tie holes should fit reusable zip ties.
I printed it in Hatchbox PLA with a .6 nozzle, 5% infill, and 4 perimeters.