Power Brick/SSD Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just another under desk power brick/SSD mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Just another power brick holder/SSD holder. I wanted one that was big enough for the largest brick I have, but I could use for the smallest as well. I put in lots of holes for zip ties.
The power brick inside measurements are 125mm x 60mm and the SSD inside measurements 130mm x 83mm. The small zip tie holes are 6mm x 2mm and the large zip tie holes are 8mm x 2.75mm . I've included the Fusion 360 CAD file along with other formats to make it easier to adapt to other needs. The large zip tie holes should fit reusable zip ties.
I printed it in Hatchbox PLA with a .6 nozzle, 5% infill, and 4 perimeters.