1 / 6
Seatpost Mount + Cateye Rear Light Replacement Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Have this rear light of which the rubber broke a while ago BUT its a good light.
This is a replacement for that so I can use this light again.
The seat post mount is for 31.8mm seatposts (which should be standard for most bikes).
Parts you'll need:
- 1 m3x20mm bolt
- 1 m3 nut
- 2 m4x20mm bolts
- 2 m4 nuts
15/01/2025 V1.1: Adjusted inner dimension length to be tighter on part. Added clip to stop the light slipping off the mount.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
No
Supports:
No
0.2
Infill:
20%
Notes:
Seatpost mount printed with PETG.
Category: Sport & Outdoors