Featherboard for Table saw and router table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Featherboard for table saw with knobs and miter slot
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 468
- Wydruki
- 2
- Wyświetlenia
- 1997
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed at .2 layer with .4 nozzle with 5 layers per wall. I used PETG for flexibility but PLA may work and PLA plus should be good. I printed 1 at 15 percent infill and it worked fine, I also printed one at 25 percent and it felt nice and heavy but performed the same, I think the 25 percent is the way to go.
Update:
2-23-25
I have added half bolts that print in half and can be slid on the dovetail together a m8 and a m6 with my own threads that will make it easier to print. They will not work with a normal m6 or m8.
I also updated the knobs for the bolt sizes. you can print the unthreaded knobs for steal bolts or print the threaded ones for the bolts I built for the model that are included.
Print profiles are also already inputted.