Featherboard for Table saw and router table
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Featherboard for table saw with knobs and miter slot
- Rating
- 5 / 5
- Likes
- 84
- Downloads
- 471
- Makes
- 2
- Views
- 2,016
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed at .2 layer with .4 nozzle with 5 layers per wall. I used PETG for flexibility but PLA may work and PLA plus should be good. I printed 1 at 15 percent infill and it worked fine, I also printed one at 25 percent and it felt nice and heavy but performed the same, I think the 25 percent is the way to go.
Update:
2-23-25
I have added half bolts that print in half and can be slid on the dovetail together a m8 and a m6 with my own threads that will make it easier to print. They will not work with a normal m6 or m8.
I also updated the knobs for the bolt sizes. you can print the unthreaded knobs for steal bolts or print the threaded ones for the bolts I built for the model that are included.
Print profiles are also already inputted.