G2E PicoMMU filament sensor hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a sensor switch hub for G2E to work with PicoMMU
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1025
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
*****update 3/20/24 Added a different hub (G2E Hub v16) that loads better than previous.
Reshaped the filament hub to fit into the G2E front body ECAS.
Added a mount to the G2E front body ECAS for the Pico filament hub to mount.
Unfortunately, the PCB cover gets blocked when the hub is attached but it's easy to remove with one M3 socket head.
I didn't want to reprint the front body so added a mount separately to be superglued onto the existing front body. Works great.
one warning…. if you don't have good layer adhesion, I would recommend printing the short version of the Buffer hub, so the tip doesn't break off in your head.