Alternative lid for GMKTec K8 Plus Mini PC for optimized cooling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop-in replacement provides better cooling for the K8 Plus Mini-PC
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 376
- Wydruki
- 0
- Wyświetlenia
- 3608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This drop-in replacement lid elevates the lid about 10 mm above the top-fan thus allowing for a much better airflow of the RAM/SSD cooling. I have measured more than 10K (10°C) difference on full power for DDRRAM temperature and 5K for SSD. CPU cooling is only slightly affected, as CPU cooling is seperated in the bottom of the case.
Edit: slightly changed the position of the posts. 01. 2.2025
Update: added a version where you can clip in the original lid for a nicer and more original looking appearance.
Please print with tree-support everywhere and be gentle when removing the lid. Otherwise you might risk to break the thin tabs on the layerlines.
OpenSCAD included as always.
Attribution:
Special thanks to Hermann Leopold, https://openscad.leopoldnet.de/kreisausschnitt.html for providing the code for circle segments.
Have fun!