RamjetX Next Level Racing - GT Ultimate Mounting Arm Sleeve Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Internet Sim Racers, Those with an Next Level Racing rig will know the pain of the adaptor arms going limp and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hi Internet Sim Racers,
Those with an Next Level Racing rig will know the pain of the adaptor arms going limp and floppy when those cheap plastic bung's start to give out... typically just 10 seconds after you've slide the arm in.
So being sick of the mounting arms grinding and moving when giving it a fist full of e-brake or slamming 17th gear like a F&F stunt driver. I've made up some replacement and solid fixes for this issue.
Whats in the pack?
- 1 x Internal End Cap
- 1 x External Sleeve
- 1 x Large logo'd End Cap (for the empty spot on the frame)
1 x Small logo'd End Cap (for the missing pipe end cap no doubt on your mounting arm too) Pictures are attached.
They are tight... and they're supposed to be. You don't want them sliding into the frame and coming off, never to be recovered. So have a little patience and a little soapy water to slide them on to the mounting arm, or do what I did and put it on the end, slam it into a carpet floor to slide it onto the arm, then using the frame to slide it in and up the shaft to the right depth...
All innuendo was intended. You're welcome.
RamjetX
Category: Hobby