Bosch GSR Bit Holder (cordless drill/driver)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now with the option to add to magnets for holding your screws for your job. Also,easier to mount because of an M6 screw.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dear maker,
I directly felt in love with the original design, because I sometimes used more then one bit during my work. But also I was screwing things to the wall and had more then one screw to mount. I nver had enough hands to hold them. Newer and bigger drills have sometimes magnetic surfaces to hold stuff. This small one from Bosch not.
Also, you'll need a M6 button head screw to mount this holder. I didn't use the original design with the nut. I directly screwed the M6 screw into the Drill which resulted in forming a thread.
You'll need following parts:
2x 12x3,6mm Magnet with a chamfer
2x heat set insert (M3)
2x M3 countersunk screw (6 or 8 mm)
For any questions; let me know in the comments.
Happy printing!