Bosch GSR Bit Holder (cordless drill/driver)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Now with the option to add to magnets for holding your screws for your job. Also,easier to mount because of an M6 screw.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 32
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dear maker,
I directly felt in love with the original design, because I sometimes used more then one bit during my work. But also I was screwing things to the wall and had more then one screw to mount. I nver had enough hands to hold them. Newer and bigger drills have sometimes magnetic surfaces to hold stuff. This small one from Bosch not.
Also, you'll need a M6 button head screw to mount this holder. I didn't use the original design with the nut. I directly screwed the M6 screw into the Drill which resulted in forming a thread.
You'll need following parts:
2x 12x3,6mm Magnet with a chamfer
2x heat set insert (M3)
2x M3 countersunk screw (6 or 8 mm)
For any questions; let me know in the comments.
Happy printing!