1U Compute Blade Enclosure for 10" Racks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1U Compute (CM) Blade setup for use with 10" server racks / mini racks
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my second pass at a 1U Compute Blade enclosure for 10" server racks. I tested it with the Pine SOQUARTZ blade boards and have had reports that is should also work with the Uptime Labs Compute Blades.
This was inspired by Jeff Geerling's Project MINI RACK which aims to popularize the form factor.
I recommend printing at least the front in ABS as the heat coming off the CMs can be enough to cause PLA to sag.
It prints on a MK3/MK4 sized printer. It just needs to be rotated 35 degrees to fit on the build plate. I recommend printing it solid and with 3 perimeters.