Revolving Desk Organizer (BONUS MODEL INCLUDED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,49 € – 0,60 € netto (bez VAT)
Dla pliku: 3-4--Hex-Wrench-MK4-MK4S-PLA-best.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,55 € netto (środek widełek).
- Masa podana przez autora
- 7 g
- Czas druku podany przez autora
- 32,4 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Desk organizer w/ cup and revolving tray. 3/4" Hex Wrench Included!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Desk organizer w/ cup and revolving tray.
I included a ¾" Hex Wrench model as a bonus!
You need 8 6mm ball bearings, but it's possible to use this without them (it just won't turn smoothly).
To insert the ball bearings, hold the tray upside down so that the bearing cages are pointing up, insert the balls (they will not fit securely or snap in, since they are supposed to be as loose as possible), put the base on, and then carefully flip it over. Now you have a revolving tray!
Feel free to remix the tray and cup to suit your needs.
If you have any questions, message me or leave a comment.
If you like this model, please like, share, and/or follow!