1 / 4
Film Photography Memo Reminder Holder — zdjęcie 1
1 / 4

Film Photography Memo Reminder Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach to a film camera to hold the cardboard end from a box of film to remind you what film stock is currently loaded.

Ocena
0 / 5
Polubienia
17
Pobrania
151
Wydruki
0
Wyświetlenia
866
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

Designed to hold the ends of cardboard film boxes to show what is currently loaded in the camera. Was modelled with an XA2 in mind but should fit onto any camera with a flat or slightly curved back. Prints best face down with no supports for me on an Anycubic I3 Mega. Have only tested with PLA but should be fine with any filament. 

I've included two STL's, one with two recessed slots to trim down thicker 3M command strips to stick to the back of the camera (slots are 0.8mm deep, you may need to adjust to suit different tapes). Second STL has a flat back for you to stick on directly with a thinner double-sided tape or glue on if that's your preference (noting that I haven't tried this). 

Tagi