1 / 4
Film Photography Memo Reminder Holder — image 1
1 / 4

Film Photography Memo Reminder Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Attach to a film camera to hold the cardboard end from a box of film to remind you what film stock is currently loaded.

Rating
0 / 5
Likes
18
Downloads
151
Makes
0
Views
872
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Designed to hold the ends of cardboard film boxes to show what is currently loaded in the camera. Was modelled with an XA2 in mind but should fit onto any camera with a flat or slightly curved back. Prints best face down with no supports for me on an Anycubic I3 Mega. Have only tested with PLA but should be fine with any filament. 

I've included two STL's, one with two recessed slots to trim down thicker 3M command strips to stick to the back of the camera (slots are 0.8mm deep, you may need to adjust to suit different tapes). Second STL has a flat back for you to stick on directly with a thinner double-sided tape or glue on if that's your preference (noting that I haven't tried this). 

Tags