LayersFactory
Zgłoś model
1 / 14
TBS Oblivion Micro Camera — zdjęcie 1
1 / 14

TBS Oblivion Micro Camera

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

Micro Camera adapter for the TBS Oblivion

Models

There are 2 models

  • Simple: Use double sided sticky tape to attach

  • Full: Use screws to attach Both have been tested with the Foxeer Pro micro camera. I don't have any RunCam cameras to test with. If you encounter a camera that doesn't fit, please let me know.

    ### Slide Down Protection

    There is an optional piece that mounts on the bottom. By threading a m3 x 10 screw through it you can get fine grained control of the camera angle, and prevent the camera from falling down in a crash.

    For extra protection, add a rubber band to prevent the camera from sliding 'up' in a crash.

    ### Tilt

    Allows for about 20° to 50° tilt.
    Flip the camera upside down to get about 10° more tilt ( 30° to 60°). You will also need to flip the camera in the OSD.

    ### Printing

    Print is stronger when printed vertically on the bed.

Category: R/C Vehicles

Tagi

tbsthingiversefoxeerruncamoblivionobliviondrone