TBS Oblivion Micro Camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Micro Camera adapter for the TBS Oblivion Models There are 2 models Simple: Use double sided sticky tape to attach…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Micro Camera adapter for the TBS Oblivion
Models
There are 2 models
- Simple: Use double sided sticky tape to attach
Full: Use screws to attach Both have been tested with the Foxeer Pro micro camera. I don't have any RunCam cameras to test with. If you encounter a camera that doesn't fit, please let me know.
### Slide Down Protection
There is an optional piece that mounts on the bottom. By threading a m3 x 10 screw through it you can get fine grained control of the camera angle, and prevent the camera from falling down in a crash.
For extra protection, add a rubber band to prevent the camera from sliding 'up' in a crash.
### Tilt
Allows for about 20° to 50° tilt.
Flip the camera upside down to get about 10° more tilt ( 30° to 60°). You will also need to flip the camera in the OSD.### Printing
Print is stronger when printed vertically on the bed.
Category: R/C Vehicles