Counting matching models…
Screw holes are 0.2" in diameter, model has a forward and rear portion to secure the Runcam from both sides. Make sure you use good, strong filament if you are going to launch this on a rocket (or anything moving fast).
Best results printing at 0.17mm layer height. If M2 screw is too long, please use a washer on the outside before inserting the screw.
Kayoumini Runcam Split 3 Light Category: 3D Printing
If you want, you can either add a ziptie to the back or thread the cable through the left open holes
OpenIPC RubyFPV Runcam camera base plate mounting
Print in tpu
This is an adapter for the Runcam 3 to fit on a Zhiyun Z1 evolution (or probably any actioncam gimbal) with the use of an extra bracket. This gimbal: https://nl.aliexpress.com/item/32984778121.html This bracket:…
original design is by FabianP on Cults 3D
OpenIPC RubyFPV Runcam camera base plate mounting
You will have to look into my other models in order to add this mount.
Screw holes are 0.2" in diameter, model has a forward and rear portion to secure the Runcam from both sides. Make sure you use good, strong filament if you are going to launch this on a rocket (or anything moving fast).
ND Filter Box for “ RunCam Thumb Pro W ” I got the “ New ” version, i don't know if the older version got the same size.. so test it ^^ ----- Between the Box and the Lid is 0.15mm “Air”, which gives a satisfying Click ;) If it's too tight…
Version 1 is simply a widened lens diameter (from 10mm original to 12mm for RCN4). I would recommend this version. It is a very snug fit around the lens. Version 2 is slightly experimental. It has slots cut into the lens mount to enable…
runcam 6 gopro mount for hoding it tight with velcro straps. Tried it with pla and petg (petg is more suitable)
Made a simple but effective fixed 25° mount for the Runcam Thumb pro for use with the SF3. The ‘plate’ was made using the files Quadmula kindly provided, the runcam mount is a model I found somewhere but can't remember where. Works great…
I designed this to be used for high powered rocketry for the new Runcam 6 camera. It has a 7.5 degree viewing angle offset from the body tube to help get a better shot of the surrounding area. The cover slides on/off to easily secure the…
Print without support and on the side that doesn't have any fillet :)
Print in TPU use TBS ND Filters: (https://s.click.aliexpress.com/e/_9ROQbh)
original design is by FabianP on Cults 3D
I have designed canopy for my Moblite6. You can find range of angles 10, 15, 20, 25 deg. There are some variations with holes to lower the weight. They are designed to easily access camera screw. Please leave your like if you appreciate…
this mounts on the y belt cover and can slide in a gopro style camera mount
A simple mount for the Runcam Thumb camera to attach it to a Grasshopper frame from AlfaRC
I couldn't find anything like it, so I simply made it. It took me few iterations, but I believe it's fitting firmly now, without the extra stress the original mount one has. Oh, and I wanted it to fit a smaller plate, of course :) Print…
Print Settings Rafts: No Supports: No Resolution: .3mm Infill: 20%, 4 wall Filament: TPU
Simple Mount from the original design to 14x14x15mm runCam Nano Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 200 infill: 20 Filament: SainSmart TPU Black Category: R/C Vehicles
Remixed HDZero Lite Whoop Camera Mount (Adjustable Angle) by MrShutterBug to include a hood for a little added lens protection. High - HDZero Lite Lens Med - HDZero Lite Lens (glued like in MrShutterBug's video - less surface area to hold…
Salut a tous !!! Voici une version du kayoumini où vous pouvez rajouter une Runcam thumb pro Poids: babyratel 30° (3.05g) + runcam mount = 4.89g Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
Smaller camera mount. I also tilted the angle of the camera, and made the model easier to print by removing ovehangs.
Custom mount for Thumb Pro W camera, weighting only 3g. Angle is 23 degrees, it's best for my use case. Print in TPU, best with organic supports ( at least in PrusaSlicer )
Printed in TPU with no supports, 25% support cubic infill.
Printed in PET-G this weights about 2g The 5.8Ghz antenna can be wedged in between the camera and the leading edge of the mount RunCam Night Eagle 3 at AliExpress: https://a.aliexpress.com/_EHhsPGd
A Canopy for Runcam nano 4 A canopy for runcam nano 4 camera designed for standard 65mm whoops. Although it should fit any frame which has 25mm square mounting pattern. The model itself has a camera angle of 40°, but it can be changed in…
Round screw box with lid for storing Runcam Thumb 2 and 4 ND filters. Second version, which fits a bit more. I will do a refined version soon, which can be slightly bigger in size ( and shorter in height) , but fit more.
These are some files that help you fit a runcam 2 to RC models, primarily addressing CAD designers who make their own construction in a (vector based) CAD or (polygon based) 3D application. Note that these files are not meant to build a…
A protective mount for the Runcam 5 orange that fits a roughly 20 by 20 ND Filter. The mount does impede vision a little bit on the edges. Print in TPU
RunCam Thumb Pro V2 4K mount for BetaFPV Pavo 30
A mount for your RunCam Thumb Pro for a SpeedyBee Bee35 frame. It replaces the GoPro mount TPU provided with the drone, and connects to the TPU cover that comes with the camera. Easy to Remix The STEP file contains two parts that can be…
I crash frequently and don’t want to risk breaking my camera. This mount does a decent job of helping the Runcam survive crashes, although the ND filter often breaks. Still, replacing a filter is much better than losing an entire camera.…
Salut a tous !!! Voici une version du kayoumini où vous pouvez rajouter une Runcam thumb pro v2 naked Kayoumini baby ratel runcam thumb pro naked hard mount tilt 30° "NEW" : support tpu pour la Runcam thumpro v1 Paramètre d'impression:…
This is a mount inspired by this: https://www.thingiverse.com/thing:4108139/files Though, he doesnt have a 55 degree mount for the new Runcam Racer Nano 4. The Runcam Racer nano 3 i used before for a long time has a significantly smaller…
This is a bike handlebar mount which allows you to use the Runcam Thumb action camera as a mounted camera on your bike handlebars. Materials needed: Runcam Thumb action camera (with power plug) 2 x 18650 batteries 2 x M4x12 bolts and nuts…
This RunCam 5 camera platform for Hot Wheels track that I made for my children. It works well on straight tracks but get stuck in Garage Tower. It uses four 624ZZ bearings as wheels and prints with supports as shown on one of the pictures.
My first and really simple model, designed with Tinkercad. Helmet mount to equip a Runcam Thumb 2 onto the front part of a Nolan N80-8 helmet. Air-intake on the front of the helmet is not obstructed. Its lightweight and strong enough to…
Rugged protective case to store Runcam Thumb 2 for travel. It uses included foam from your purchase of Thumb 2 for added shock and scratch protection. Also included is room to store your ND filters for easy carrying and swapping on the…
Mounts the runcam3 camera to the diatone crusader gt2 Printed with saintsmart TPU 220 degrees 1.1 retraction Printing can be tricky since TPU doesn't handle bridges well. For best results, print face down and as slowly and cool as…
Print with PETG with 0,1 layer. Use servo crews to mount cam gear and to mount gearbox on servo.
Mostly uses M2 screws, screw into 3d print plastic. Capable of full 180 degree tilt and 360 degree swivel. NO wire protection yet - that will be added soon.
Yet another pan tilt system. The advantage of the system is that two sets of pillars support multiple mounts that could be swapped by unscrewing two M4 screws. Category: R/C Vehicles
this is a variation of my original thumb mount. dimensions are different so there are some artifacts from the original that I chose to ignore.
This will fit Runcam Thumb 2 camera for any drone that has screws offset from each other at 25mm. Currently the ones I have are GepRC Tern LR40 and Diatone Roma L5. Print with TPU on the side as shown in one of the images, with supports.…
This is an universal camera mount for Runcam Thumb 2 for attaching to battery straps on almost any drone that fits. No supports are needed, print on one of the sides. Print with TPU, 100% infill. You can add some thin rubber anti-slip mat…
To make the mount, follow these steps: Print the model using TPU, 4 perimeters and 100% infill Put the runcam thumb pro inside the mount by bending it slightly. Use the M2 screw and M2 nut (included with the camera) to attach to mount to…
20 degree Runcam Phoenix mount for Grinderino. Print in TPU
I love iFlight Transframe X5 frame but why HD camera with uptilt 45 degree ?! So .... Category: Camera
To mount this to your Phoenix you will need longer m2 screws, and 1 m3 screw.
This is an adapter for Runcam2 only using the standard gopro snode. It fit in the camera holder Print Settings Printer Brand: Zortrax Printer: Zortrax M200 **Rafts:** Yes Supports: Yes **Resolution:** full Category: Camera
Run cam 2 cap cover for protecting lens Print Settings Printer Brand: Zortrax Printer: Zortrax M200 **Rafts:** Yes Supports: Yes **Resolution:** full Infill: 20% Category: R/C Vehicles
To mount this to your Phoenix you will need longer m2 screws, and 1 m3 screw.
Hi, Here's holder to mount PZ0420M fpv cam to RCX X130 frame. Use M2 screws for fixing. You may need to drill holes open. Print Settings Printer: CTC Rafts: No **Supports:** No Resolution: 0,15 **Infill:** 50% Category: Hobby
Pavo 20 Pro Runcam Wifilink 2 Canopy This is a custom-modeled canopy for the Pavo 20 Pro, designed to fit a Runcam Wifilink 2. Printing Recommendations: Material: PETG or PLA Infill: Minimum 15% Gyroid Layer Height: Maximum 0.2mm…
You will have to look into my other models in order to add this mount.
I needed a mount for the Runcam 5 Orange and tried the Foxeer Box 2 mount but it was too big, so an hour in CAD and this is the result. 25 degree up-tilt.
Redesign of my GEPRC Runcam 5 Mount to fit the Martian 2 Anniversary Edition frame. 25 Degree up-tilt. Print as orientated, supports recommended, but the holes can be bridged.
Designed to use the existing wingbolts of the aircraft, it can be mounted on either the left or right side of the tailplane (or both). Runcam6 holder is retained with the separate (green) piece which is screwed down with a countersunk M3…
Runcam WifiLink V1 mounting plate mounting plate with lock mechanize for the missing 2 poles
I've taken the base GoPro base mount From Quadmula to use their current hardware to prevent the TPU from tearing and having more support overall. I was having issues with my past mount, either a tough hit would move the camera out of…
Used M3 25mm doublesided adhesive tape. Mount looking straight forward and horizontal
A protective drone mount for the Thumb Pro camera. I made this mount for the Tinyhawk 2 Freestyle, but the holes are the same as the original mount included by the manufacturer, so I guess it fits more quads. If other hole spacing is…
Gridfinity holder for runcam thumn pro 4k
It's pretty tight on Wizard x220,but fits. I attached a .blend file so feel free to widen it a bit if needed. You might need a brim, but I did it without and worked great on Creality Glass Bed. My setup: 0.4mm nozzle, 0.2mm layer height,…
Even though the WifiLink VRX strongly resembles the HDZero VRX and has similar looking rails, it appears to be a different size. This mount slides onto the WifiLink front rails, holds the TrueRC X-Air. Print vertically with a brim, no…
This is a sd cover for the RunCam Thumb Pro W, that allows you to mount extras to it. NOT meant for drone or rc vehicle mounting. I made this to mount a 40mm fan to stop it from overheating when used as a webcam. Screws used: 1x 2mm screw…
This light weight mount slides onto the brim of your baseball hat. The Runcam 5 slides into the front of the mount with a secure snug fit. Two options, one angled up, the other flat
This is a simple replacement for the original Leader 120 camera mount meant to fit the Runcam Nano FPV camera. There is very little clearance between the mounting screw and the Runcam Nano circuit board, use caution when installing if…
there are 2 mounts in here one is if you want to mount the camera high and partially unprotected and you will need M2x6mm screws for the camera, this provides a snug fit with plenty of build room behind it. also a little protection.…
Highlights Weight-optimized at only 7 grams Covers the camera module from three sides at full tilt range (0-30deg) Two 3.5mm antenna mounts accommodate your favourite CP antennas Optional lightweight arms to use with simple dipoles that…
ND Filter Box for “ RunCam Thumb Pro W ” I got the “ New ” version, i don't know if the older version got the same size.. so test it ^^ ----- Between the Box and the Lid is 0.15mm “Air”, which gives a satisfying Click ;) If it's too tight…
FPV camera mount for Traxxas VXL E-revo 1/16 to use in the canopy. The camera i used is a Runcam NANO. I printed it in TPU to be extra resistant for when the car flips over. The camera i used is this one:…
Camera is moved as close to the edge as possible, to allow for a bigger battery. Designed with perfect dimensions, so can be printed with any plastic, however TPU is strongly recommended. Camera is held in place with a kit M1.5 (1.5mm)…
This small FPV camera is usually meant to have cool air passing by it when mounted on a RC drone or plane. I wanted to mount it on my RC crawler and had a 30mm fan in my leftover electronics box. Center distance of the fan holes is 24mm.…
Use this to have your quad feel the same when not running the Thumb 2. Printed in TPU at ~55-70% infill it should be close to the weight of the camera + basic mount. Also adds some protection for the mount and battery. You can adjust the…
After being unable to find a simple yet robust pan and tilt module that could also house a Runcam Thumb Pro, I made this to suit my fixed wing FPV needs. The part is similar in design to the pan an tilt by Painless360, but this uses a M2…
Just a couple of fixed mounts for the grinderino. Print in TPU on its side with supports for best results 20 degrees for fun freestyle. 35 degrees for those that wanna RIP!
for my Armattan Chameleon with Runcam Eagle micro and for my GEPRC Mark2 (Adaptor V2) made it with 3mm nylon hex nuts and a little more robust than the original. Printed in PETG at 0,2mm. V2: extra holes for camera so it goes deeper…
Didn't have a good way to mount the Runcam Link Antenna when I switched to digital.
Antenna mount for Runcam Link using rear standoffs. Spacing is to account for TBS Crossfire antenna mount that came with Nazgul5 V2.
These camera's are made pretty robust, and I've gotten lucky that mine hasn't been shot out over the years of playing Airsoft. I play as a Sniper, and I've had my scope cams glare give me away at times. Figured this was a great way to…
This FPV case can be used on the Duke Doks's CRAMER Truggy RC 4x4 standard version and also on his body kit if you print “Cramer_Body_Spoiler wth FPV test” file.…
The RunCam Phoenix 2 JB Edition is a great analog FPV camera, with the amazing quality it already provides, the FOV allows sunlight in at sharp angles with this lens hood, you'll prevent that. It fits great and won't slide off when…
i needed a mount for my 90gt to mount a runcam split mini youll need longer standoffs to raise the camera out of the propellors if you mount it in front the file with the bar is to glue a camera mount to with the "20x20" file, the bar…
Needed a case for my runcam 5 that allows me to tilt it up more when mounted on my chest (due to the gopro/actioncam -mounting point protruding a bit from the case). Having big gaps around it for easier access to charging/sdcard/button…
Protective box for camera RunCam Thumb Pro The box can hold the camera, camera lens protector, a set of 3 ND filters and two micro SD cards. The files also include a camera lens protector (TPU)
These camera's are made pretty robust, and I've gotten lucky that mine hasn't been shot out over the years of playing Airsoft. I play as a Sniper, and I've had my scope cams glare give me away at times. Figured this was a great way to…
The TBS Source Two V0.1 is a low cost, high performance 5 inch Racing Frame, however it struggles in turtlemode due to the underslung battery, so add a shark fin and you're almost guartneed to be able to turtle out of most crashes! I've…
