1 / 13
4 types of Dividers for IKEA ORDNING Utensil Holder — zdjęcie 1
1 / 13

4 types of Dividers for IKEA ORDNING Utensil Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

From beginning to make a model for 4-section divider for IKEA ORDNING Utensil Holder, I ended up to made 4 different types of dividers ranging from 2-section to 4-section configurations. These could accommodate different types of cutlery and utensils (and something else too) for my needs, and probably for your needs too.

Note:

  1. The round side on the partitions goes bottom
  2. For the 3-section divider that has same angle evenly, 3 pieces of the partition part are needed, therefore please print 3 pieces.

 

You can download the FreeCAD model file.

Watch the Youtube Shorts for more details.

 

Please add comments for any improvements/issues/ideas/etc.

Tagi