1 / 2
Gridfinity OralB Dual Charger/Single Outlet w/ Toothbrush Stand — zdjęcie 1
1 / 2

Gridfinity OralB Dual Charger/Single Outlet w/ Toothbrush Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two Chargers, one outlet. Toothbrush stand as an removable insert for easy cleaning.

Ocena
0 / 5
Polubienia
8
Pobrania
36
Wydruki
0
Wyświetlenia
448
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

Finally a neat place for both my chargers and with just a single outlet!
Base and top part printed in PLA Meta, the head stand insert is TPU 98A.

I wanted it as an insert to take it out in order to clean it more easily. Also it allows for easier customization, if you need more or less stands.


Snap the chargers in place, they should fit perfectly (thanks to the great mold by https://www.printables.com/@UkoTerpuh).

8 M2x12 screws needed. Take care, one of mine snapped off :( That's the reason, why I can't disassemble it to show the insides - sorry. But it's pretty straigt forward, I guess.

Also, I used two of these electrical connectors (3 way connector, search maybe for 413 electrical connector) from aliexpress: https://de.aliexpress.com/item/1005006271613810.html

Wago 221 should fit as well, but is untested.

The chargers draw (according to the inscription on the bottom) around 0.9W, so nothing to worry about. But -of course - no warranty, do it on your own risk - it's still mains power supply!

Magnet at the base are 5x2mm;

Tagi