Larger, Huge Shelf for HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A much larger shelf for honeycomb wall for your figurines and stuff !
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 362
- Wydruki
- 1
- Wyświetlenia
- 937
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Due to my inability to find a much larger shelf than the ones available for download on the original HSW page, I made one by myself. This shelf is much wider, and deeper, and consists of 2 pieces that have a small tolerancy and should clap together. If it does not fit - just use a bit of the sandpaper, and it will be very tight and very strong. You need 4 empty inserts from the original HSW page for this shelf to mount.
Standard 0.4 nozzle, 0.2 layer, 15% AI infill, few organic tree supports needed, preferably PETG.
Print files are for Ender 3 V3 SE