1 / 6
HexiBox Series-Dayton TCP115-4 7th Order Bandpass Subwoofer Cut with connectors and without led — zdjęcie 1
1 / 6

HexiBox Series-Dayton TCP115-4 7th Order Bandpass Subwoofer Cut with connectors and without led

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hexibases 7th Order Bandpass Subwoofer cut for small beds with connectors and without led strip

Ocena
5 / 5
Polubienia
25
Pobrania
232
Wydruki
1
Wyświetlenia
1547
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Try this as a smoother, less broken-up version:

20 cm x 20 cm Print Bed Version

This is a modified version of the subwoofer enclosure, split into smaller parts so it can be printed on 20 cm x 20 cm print beds. I added connectors to make alignment easier during assembly and removed the holes for the LED strip.

Small connector test files are included, and I recommend printing them first to check the fit before starting the full build. The included 3MF file contains my print settings and the parts already arranged on the print beds.

For reference, I printed this on an Elegoo Neptune 4 Pro with a 0.4 mm nozzle using PLA+. The total print time was multiple days. The subwoofer is now fully printed, assembled, and working, and the final result sounds really nice.

I highly recommend using an enclosure, as I had some trouble with warping even with PLA+ therfore i had some trouble during gluing. The connectors help with alignment, but dry-fitting everything before gluing is definitely a good idea.

After assembly, I sanded the box, sprayed it with primer, and painted it black to cover the glue seams and give it a cleaner finish. I am not sure if I would print it this way again because of the amount of assembly work, but the final result was worth the effort.

Tagi