1 / 2
Makita CARBON BRUSH CB-153 / stator tool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makita Flipper motor overloaded and stator replaced. Tool helps with the attachment of springloaded connectors.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Print with a about 50%. Infill. 2 of them is needed. Stick the stator sping connectors on, lower the stator into place. Use pliers to hold on to the lever and stick the printed tool into where brushes are normally placed. This tool will orientate and let you roll the connectors from the tool onto the copper connectors.