Canyon GEAR GROOVE Garmin Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Computer Mount for Canyon GEAR GROOVE cockpits - with integrated Garmin mount
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 651
- Wydruki
- 2
- Wyświetlenia
- 3244
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The GEAR GROOVE Garmin Mounts are sold out on the website, so I added the lock made by @Trunda_1437739 to a GEAR GROOVE model.
Included are 2 .3mf files; one in normal orientation with ironing on top level, but the upside down orientation (file called "_USD" in the end) has a better finish if used with a smooth print bed.
I printed on a BambuLab A1 Mini in normal PLA with tree supports and 5 walls, but could be printed in PETG for extra sturdiness.
You will need the screw from the top cap, and an extra at the bottom (2 x screws M6 x 12mm).
Make sure to secure your GPS with the elastic band around your steering wheel incase the print breaks during riding !!
Happy riding!!