1 / 1
Z axis belt tensioner for Anycubic Kobra 3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A device to tension loose Z axis belt. You will need 2 608 style bearings and 2 M3x10 bolts.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 303
- Wydruki
- 0
- Wyświetlenia
- 1362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (56)Powiązane
Simple Z-axis tensioner. Parts are held together by dovetail joints, two bolts need to be screwed to fix bearing carriage in place.
Assemble the carriage with one 608 bearing first, not inserting the shaft all the way. Then slide it onto the body and secure body to the beam. Capture one side of Z belt onto the bearings, then insert the second one and snap axis to place. Everything should be held together by friction.
Then adjust tension level to your liking and secure the carriage by 2 M8x10 bolts.
