Fernglas Gucker Halterung 15,7 mm Stativmontage binocular holder tripod mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fernglas Gucker Halterung 15,7 mm Stativmontage binocular holder tripod mounting
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Halterung für ein Fernglas / Gucker / Porroprismenfernglas mit einem Mittelstegdurchmesser von 15,7 mm.
Es werden zwei Schrauben M5 x 25 mm oder länger benötigt sowie eine 1/4 Zoll UNC Einschmelzmutter.
Mit dem bodenseitigen 1/4 Zoll UNC Kameragewinde läßt sich die Halterung auf so gut wie jedes Stativ oder jede Schnellwechselplatte montieren.
Der Sterngriff für die Sechskantschraube kann sowohl als Schraubenschlüssel als auch als Sterngriff benutzt werden wenn man die Sechskantschraube einpresst.
……………….
Mount for binoculars / porro prism binoculars with a center bar diameter of 15,7 mm.
Two M5 x 25 mm or longer screws are required, as well as a 1/4 inch UNC sealing nut.
With the 1/4 inch UNC camera thread on the bottom, the mount can be mounted on almost any tripod or quick-release plate.
The star grip for the hexagon screw can be used both as a wrench and as a star grip when the hexagon screw is pressed in.