Liczymy pasujące modele…
Documentation Updates Model Version Date Description 1.02 9/3/24 Added to the errata a workaround to close the gap between the right eyecup base and the adapter base. I realized this hole could allow dust to get on your lens. I'll close…
GoPro Adapter for Binoculars (Parametric) This is an adapter for having the GoPro film (coaxially, normally) through its own lens while mounted to the binoculars. It is not an adapter for shooting through the bincoular optics themselves!…
NATO/Picatinny Rail for Binoculars (Parametric) Mount NATO/Picatinny/Weaver compatible stuff on your binoculars (i. e. action cameras). Works with binoculars that have a 1/4" thread in the hinge. Print instructions Category: Camera…
Hi, everybody! I have created a mount for my newly purchased magnifying binoculars. These binoculars are popular among modelers and electronics enthusiasts, and they are essential for dentists. The glasses provided by binocular…
Printed with TPU filament, I used Easyprint. Temps as sugested by Easyprint. 190°C Nozzeltemp 40°C bed temp Layer height 0,15mm
These are custom front lens caps designed for the Pentax UD 9x21 binoculars. The original binoculars do not come with front lens caps, so I created this model to provide proper protection for the lenses. Features: Designed to fit snugly…
Parts list: Battery contacts: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr. Positive und negative Metall batterien Feder kontakt platte ersetzen - AliExpress 13 Power outlet connector: ( Male and female) 1 Stück 5,5 x…
Binocular covers are easily lost. Scope covers are expensive. 3D printed covers are usually bulky, fragile, and complicated affairs, with lots of easily broken moving parts. They also are difficult to properly size to your needs. TPU…
Reading is a journey. This binoculars-shaped bookmark is made for curious minds and explorers at heart. It clips naturally onto your page, stays put, and brings you back exactly where you left off. Clean design, strong idea — for readers…
This creates a much more stable 3-point interface with your face. Similar to what Swarovski offers for their high end binos. larger distance to forehead pad for more stability. Uses a 1/4-20 screw and washer to attach the two pieces to…
Eyecup Spacer for Swarovski Habicht 8x30 W (Binoculars) This spacer was specifically designed for the Swarovski Habicht 8x30 W binoculars. It is installed between the binocular body (eyepiece) and the rubber eyecup to noticeably increase…
Clone trooper macrobinoculars great for cosplay, comic cons and other events. Great for a first personal Star Wars project.
Made it to replace one on my Kahles binoculars. Sliced X&Y scaled at 99% just in case. Screws in perfectly.
This is a replacement piece for the AmScope B120C. This replaces the binocular covers around where the lenses reflect into the scope. There is a 3mf (recommended, I have dialed in the settings for this), an STL, and a freeCAD file if you…
Like many people right now, I have the option to work from home part time to reduce the number of people in the office. I got to see first hand what my wife has already been juggling for a week as we both work and try to maintain our…
Designed to attach semi permanently to one of the barrels of NIKON Trailblazer binoculars in order to attach them to backpack straps when not in use. Parametric design allows for customization of parameters such as barrel diameter, barrel…
I don't like carrying binoculars dangling around my neck and find bino harnesses too much a hassle. This 2-parts adapter allows to fit a capture clip mount to a pair of binos (mine are Kite Lynx HD+ 8×30), in order to secure them to a…
A binocular mount that fits a Focal tripod shoe. Printed in PETG with three perimeters for added strength. The print uses 15% infill from the base up to about where the washer makes contact (at 65 mm). From there up to the top I switched…
Impression sans support. Film spécial : Baader Planetarium AstroSolar Filtre solaire pour l'observation solaire 20 x 29 cm https://www.amazon.fr/dp/B002SYD2EM
Printed with TPU filament, I used Easyprint. Temps as sugested by Easyprint. 190°C Nozzeltemp 40°C bed temp Layer height 0,15mm
Here's a small little accessory for Cliffjumper as a homage to its appearance in the latest comics - his pair of binoculars! To allow him to be able to hold it, the main option for this piece comes with the 5mm peg. But, we've included…
Sig Sauer Zulu 5 (10x42mm) Binocular: Anti Reflection Device (ARD) aka Killflash, Binocular Cap and Shock Collar System
And kicking off the 2024 - here's Megatron's waaaay oversized binoculars from back in the fun G1 days! Used by the Decepticon leader himself to observe the Asteroid in outer space, the zoom on these must have been powerful indeed! And as…
Here's Lookout Mountain binoculars set from the pivotal moment where Daniel spots something amiss with the Autobot shuttle coming in to land! The binoculars is sized to allow a legend class figure like Spike here (who is standing in for…
This model is compatible with the lego system.
Designed this prop opera glasses / theater binoculars for a friends birthday. There are holes so you can look through them. I printed them "looking" upwards. Supports are needed for the middle bit and under the arm. Enjoy! Category: Props
I have a set of Ricoh/Pentax AD 8x25 binoculars, and I thought Fazal's model would fit. However, I wanted an eyelet so that I could attach the lenscap to the strap on my binocular to reduce the chance of losing it. I added the eyelet in…
Halterung für ein Fernglas / Gucker / Porroprismenfernglas mit einem Mittelstegdurchmesser von 13,8 mm. Es werden zwei Schrauben M5 x 25 mm oder länger benötigt sowie eine 1/4 Zoll UNC Einschmelzmutter. Mit dem bodenseitigen 1/4 Zoll UNC…
Halterung für ein Fernglas / Gucker / Porroprismenfernglas mit einem Mittelstegdurchmesser von 17,4 mm. Es werden zwei Schrauben M5 x 25 mm oder länger benötigt sowie eine 1/4 Zoll UNC Einschmelzmutter. Mit dem bodenseitigen 1/4 Zoll UNC…
These rings/retainers allow a Baader solar film to be used with the Svbony SV47 8x42 binoculars Printed with: 15% infill PLA+ 0.4mm layer height no supports required You can just cut the Baader film accordingly and jam between the two…
Halterung für ein Fernglas / Gucker / Porroprismenfernglas mit einem Mittelstegdurchmesser von 15,7 mm. Es werden zwei Schrauben M5 x 25 mm oder länger benötigt sowie eine 1/4 Zoll UNC Einschmelzmutter. Mit dem bodenseitigen 1/4 Zoll UNC…
Objektivdeckel für einen 20 x 60 Feldstecher. Aufgrund des geringen Platzes im Köcher wurden die großen Deckel so konstruiert, daß sie innen passen. Ebenso ist der Durchmesser so gestaltet, daß die Deckel mit DC-Fix Velour beklebt werden.…
Protective eyepiece caps for «Nikon Sportstar EX» binoculars The standard eyepiece caps included with the binoculars tend to fly off at the most inopportune moment, and they also have no fastening - you have to put them in your pocket or…
Nothing big. I just didn't want to have to track down an M3 nut and bolt. So I added a tab and hole from from tbuser's Pin Connectors V2 and mixed them in TinkerCAD. The picture is from before I realized that I broke the string hooks…
These are custom front lens caps designed for the Pentax UD 9x21 binoculars. The original binoculars do not come with front lens caps, so I created this model to provide proper protection for the lenses. Features: Designed to fit snugly…
The GalaxEye binoculars aren't supplied with any dust caps to protect the lenses. These will fit perfectly. Be sure to print them in TPU as I haven't tried them with other filaments that do not flex. There's one front and rear dust cap in…
I needed some toy binoculars for a kids spy birthday. Also wanted the kids to actually be able to use them. This is rev 1, printing now, may have to adjust how far apart they are. Print instructions Category: Toys & Games Print Settings…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Parts list: Battery contacts: 100 stücke Batteries chrapnell aa oder aaa Batterie feder 5 Nr. Positive und negative Metall batterien Feder kontakt platte ersetzen - AliExpress 13 Power outlet connector: ( Male and female) 1 Stück 5,5 x…
I got a red dot finder with a telescope - don't even know what this mount is properly called though it seems common. Looks a lot like a "Celestron Star Pointer" but is not branded. I have some large Celestron 20x80 binoculars that have a…
After a while my Amscope SM series microscope started to squeek when pivoting it out of the way of my workspace. The paint/powder coating had worn away on the very small surface that supports the microscope. I got a thrust bearing and…
hard to find eye cup replacement for vintage pair of Leupold binoculars. I hope your supports are dialed.
3D Print Files in STL format of handheld Macrobinoculars Make this iconic piece of movie props at home with your own set of Macrobinoculars! Comes pre-separated into 4 main bodies for easy printing as assembly. The viewing lens comes in 2…
Astronomie-Taukappen um das Beschlagen der Gläser zu verhindern und um Streulicht zu blocken. Gedruckt auf einem Prusa MK4 mit Color Fab LW-PLA, mit einer Temperatur von 245°C und einem Extrusionsfaktor von 0,7. Das LW-PLA ist extra…
Astronomie-Taukappen um das Beschlagen der Gläser zu verhindern und um Streulicht zu blocken. -------------------------------------------------------------------------------------------------------------- Astronomy dew caps to prevent…
Binocular covers are easily lost. Scope covers are expensive. 3D printed covers are usually bulky, fragile, and complicated affairs, with lots of easily broken moving parts. They also are difficult to properly size to your needs. TPU…
Adjustable binocular holder for smartphone. Or adjustable smartphone holder for binoculars if you prefer. This first design I made should work for a large range of smartphone's size. Some metal hardware are required, I design the frame…
Binocular solarfilter holder. My binoculars are Kronos 20x60. If you have smaller front lense (here 60mm) you must scale the size. With print you need also solarfilter:…
Lost lens cover for my Nikon Action 10x50 6.5 Binoculars so I printed one. Included Rhino file so people that have it can modify if needed. Printed out of PLA.
This is an attachment to a 70mm lens that allows one to add a filter in the form of a 90mm x 90mm hexagonal sheet. ✅Fits Snugly ✅Remains in Place ✅No Light Leakage I used this specific design during the 2024 eclipse in North America with…
This tripod was designed to hold any cellphone, but could be used with a variety of items. The height of the tripod is controlled by the lengths of the various ½" PVC tubing that you decide to use. I preferred to make the rounded feet out…
A hinged split ring clamp designed for binoculars that lack a built-in tripod adapter to be mounted on a standard Arca-Swiss tripod. Uses a draw latch for quick, study, and toolless clamping and release. Great for birding and astronomy.…
As there are only some crap covers for the eyepieces included I made my own protection for the SIG Zulu6 HDX Binos. Printed with TPU.
This model is compatible with the lego system.
This adapter can be used to connect an iPhone 15 in its case to binoculars exactly such that the normal lens interfaces the binoculars to take nice, zoomed pictures. The FreeCAD model is also provided so that it can be quickly adapted for…
Binocular Adaptor - iPhone 15 Pro Max - for Diamondback Vortex 10x32 Binoculars - Easiest to print this model as two seperate pieces and super-glue together. -Added a MERGED file which can be printed using supports, but I find it much…
I made a replacement for the lost screw that came with my brother's Vortex binocular. Te screw is like a button, it purpose is to protect the thread of the tripod mount.
Adapter to mount Binocular on tripod Tripod model: Manfrotto Compact Advanced Kit de Trépied + Rotule 3D 5 Sections Noi
This lens cover is designed to protect the eye pieces of your binoculars from rain, dust, etc. In my experience the following sizes fit the following binoculars, however there may be some variation based on print settings. 39mm - Vortex…
Check belt for model compatibility. Side hole dimensions: 40x5mm Quick release pyramid dimensions: 42x42mm Printed with 3 perimeters & 30% infill, PLA Tested with SOLOGNAC tripod and binoculars If you have difficulties tightening your…
Hi all I have few changes on this one and wanted to share I have made this one a little different and it seems to work great for me on my iphone with phone case and I have added magnet to have great grip and it holds the phone fantastic,…
Here's my version of Kenobi's Binoculars that he used in the new Kenobi Trailer. Category: Props
Remix of ReProp's Kenobi Binoculars. I added a dial on top and on the right side, as well as a space for a blue LED, reshaped the front panel, and decreased the overall height. On my print, I have a small magnet under each dial to hold…
Designed for 65 ... 70 mm diameter (0.5 L multi-use bottles). Use scale function in your slicer for other diameters. Only the «Focus Knob» needs support. M5 screw and nut needed. I used black PETG, 0.3 mm layer height and 3 vertical shells.
For some reason the linking function on Thingiverse is broken. This is a remix of L-Adapter II ( https://www.thingiverse.com/thing:1849725 ). I created a larger space for the 1/2" nut in the base since my nut wouldn't fit in the original…
Printed with TPU. 25% Fill density. No supports. Attached with a piece of fabric.
Reading is a journey. This binoculars-shaped bookmark is made for curious minds and explorers at heart. It clips naturally onto your page, stays put, and brings you back exactly where you left off. Clean design, strong idea — for readers…
Style One is the most accurate, but not all the small details can be seen on print. Style 2 is a mixed style, but the details show up better.
This creates a much more stable 3-point interface with your face. Similar to what Swarovski offers for their high end binos. larger distance to forehead pad for more stability. Uses a 1/4-20 screw and washer to attach the two pieces to…
A binocular tripod mount with laser pointer holder (14mm) for an easy targeting on the night sky. An screw inster of 1/4 20 is needed but the insertion hole is made. Category: Sport & Outdoors
These solar film holders were designed for the Nikon Monarch 7. The holder is held by friction by the soft coating of the binoculars. The two parts snap together with magnets (3x1mm). Be sure to use proper solar safety foil designed to…
Eyecup Spacer for Swarovski Habicht 8x30 W (Binoculars) This spacer was specifically designed for the Swarovski Habicht 8x30 W binoculars. It is installed between the binocular body (eyepiece) and the rubber eyecup to noticeably increase…
This will be usable "as is" by very few people because it is intended for a specific binocular and also a tripod, but I hope it will serve as an idea and a starting point. That's why I've also packaged the Sketchup file so you can edit…
Realme 7 Pro (and similar) binoculars adapter
Simple end caps for two sizes of Swift Audubon binoculars, 7x42 and 8.5x44 from years ago. My original end caps started falling off so I designed these. Should be printed using TPU 95A filament. Fusion f3d and step file included.
I found a pair of decent-ish quality unbranded binoculars in a charity shop. No lens covers or protection, so once they were cleaned up I designed these as a travel brace and lens cover. They friction fit the 40mm rubber eye caps well…
Do you love Toy Story and Lenny the binoculars then you will love this 3d print file.
Astronomy right angle adapter for bigger binoculars (15x70 20x80) or similar types Componets: 2x Seagull Right Angle Finder or similar types 6x M3 screw Note: First, print the test ring to select the version according to the size of your…
Solar Filter for Binoculars 15x70 or 20x80 and 10x50 use with BAADER AstroSolar Safety Film (OD 5.0) Use a tap to create a thread for screw FreeCad source Category: DIY
Astronomy red dot finder holder for big binoculars 20x80 (25x100) or similrar types Other componets: 7x M3 srcew 5x M3 nuts 1x Red Dot Finder Note: Use a tap to create a M3 thread in the dovetail For Binioular 15x70 see:…
Astronomy Red dot finder holder for bigger binoculars Celestron SkyMaster 15x70 or similrar types. Other componets: 2x M3 srcew 1x 3/8 Inch Female to 1/4 Inch Male Tripod Thread Reducer Adapter 1x Female 1/4 to Male 3/8 Convert Screw…
Clone trooper macrobinoculars great for cosplay, comic cons and other events. Great for a first personal Star Wars project.
Made it to replace one on my Kahles binoculars. Sliced X&Y scaled at 99% just in case. Screws in perfectly.
This is a replacement piece for the AmScope B120C. This replaces the binocular covers around where the lenses reflect into the scope. There is a 3mf (recommended, I have dialed in the settings for this), an STL, and a freeCAD file if you…
🏺 The Honest Shelf Series // Vol. 76 🏺 Meet Your New Desk Companion: The Peeping Planter ✨ A whimsical, character-driven pot designed to keep an eye on your productivity while cradling your favorite greenery. 🌿 If You are interested of my…
Like many people right now, I have the option to work from home part time to reduce the number of people in the office. I got to see first hand what my wife has already been juggling for a week as we both work and try to maintain our…
Designed to attach semi permanently to one of the barrels of NIKON Trailblazer binoculars in order to attach them to backpack straps when not in use. Parametric design allows for customization of parameters such as barrel diameter, barrel…
For any binocular with 1/4"-20 female front mount. Designed for binoculars with up to 50 mm objectives. I use these with my Vortex Ranger HD R/T 10x50 binoculars. 2 lengths provided 80mm, 55 mm. The shorter one will fit in most binocular…
This is a high-fidelity 3D model of modern tactical binoculars, meticulously crafted in Plasticity 3D using a professional CAD/NURBS workflow. The result is a prop with exceptionally clean lines and realistic mechanical details, perfect…
This is a front lens cap for the objective lens on the Fujinon Techno Stabi 12x28 Image Stabilized binoculars These binos do not have objective lens caps as part of the original purchase. I've tweaked the model so they are a more precise…
Bought vintage Leitz Trinovid binoculars, so I needed a case to carry it around on my nature walks. Just print it as is. PLA or PETG is okay. No support needed.
We got a foldable paper binocular from a kids craft event. The paper was torn, but we want to utilize the lenses.
Bushnell model number 150142. Printed in TPU with a 4mm nozzle. I printed it with supports and with the outside of the cap on the printer bed like a bowl on a table. The external diameter of the binocular lens tube is about 54mm wide, and…
![[CyberBase System] Lookout Mountain Binoculars Set](https://media.printables.com/media/prints/1047541/images/7939150_b334c46d-0c4e-48a9-b92e-f89b087812f1_32ac2577-a155-4e2a-967d-285caf68e876/lookoutmt_fs.jpg)
