Tripod for Cell Phone, Binocular or Shooting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tripod that can be used to hold a cell phone or other items at various positions.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 599
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This tripod was designed to hold any cellphone, but could be used with a variety of items. The height of the tripod is controlled by the lengths of the various ½" PVC tubing that you decide to use. I preferred to make the rounded feet out of TPU for a little add stickiness on a hard surface . The pointed feet I used to stick into the ground. The “Nest6” file is for a general purpose platform that may be used as a binocular or shooting rest. It has nothing to do with holding a cellphone.
July 7, 2025: I made some changes that should make the assembly of the collet into the base easier. I also suggest that making the collet from ASA, ABS or Nylon may help avoid breakage while removing the supports. I recommend avoiding supports for any of the threads. I have had good luck printing threads without supports when using a layer height of .15 mm.
Oct. 10, 2025: I added a longer base jaw (Base Jaw L) and adjustment screw (Adjustment Screw L) to accommodate holding the cellphone vertically.