Gridfinity 1x1 solder spool holder with guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parameteric 1x1 Gridfinity solder spool holder using a 608 bearing and M8 bolt to achieve unlimited spool width.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Parameteric 1x1 Gridfinity solder spool holder using a 608 bearing and M8 bolt to achieve unlimited spool width.
While other holders either build a fork around the spool, limiting its maximum width, or insert the bearing into the spool hole, adding constrains on compatible spool designs, this one uses a M8 bolt (potentially cut to size) as an axle, a locknut to secure it in place, and a bearing to reduce friction. In other words, less plastic, more commodity items you have a bunch of already.
Print this the holder face down, adding supports for that end of the Gridfinity interface.
The code can be found here, in a fork of cq_gridfinity. You can edit the variables at the bottom to adjust for larger spools, other bearings, etc.