Gridfinity 1x1 solder spool holder with guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parameteric 1x1 Gridfinity solder spool holder using a 608 bearing and M8 bolt to achieve unlimited spool width.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Parameteric 1x1 Gridfinity solder spool holder using a 608 bearing and M8 bolt to achieve unlimited spool width.
While other holders either build a fork around the spool, limiting its maximum width, or insert the bearing into the spool hole, adding constrains on compatible spool designs, this one uses a M8 bolt (potentially cut to size) as an axle, a locknut to secure it in place, and a bearing to reduce friction. In other words, less plastic, more commodity items you have a bunch of already.
Print this the holder face down, adding supports for that end of the Gridfinity interface.
The code can be found here, in a fork of cq_gridfinity. You can edit the variables at the bottom to adjust for larger spools, other bearings, etc.