Magnet and string lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Lamp which can be turned on by moving two magnets close to each other. Needed parts: 3D printed parts, see attached…
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A Lamp which can be turned on by moving two magnets close to each other.
Needed parts:
- 3D printed parts, see attached STLs.
- 12V Power supply
- 12V LED Strip
- End Stop Switch or "Micro Switch" with roller
- 2 pieces of string
- some wire
- 2 Magnets in cylindrical form: D=10mm, L=5mm
M3 Nuts and Bolts for mounting the microswitch. The main case parts need to be glued, I used "UHU Allplast" glue for plastics. You can use short lengths of filament to align all parts.
This micro switch would work:
https://www.amazon.de/Unbekannt-St%C3%BCck-Mikroschalter-Wechselschalter-polig/dp/B00BXHN0J2/Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.15mm
Infill:
10% Gyroid
Filament:
AHDE-PLA-WT-1KG PLA White translucent
Notes:
Do NOT use supports. this is printable without them.
The Diffusors need to be printed separately (at least on Prusa i3 MK3) due to space constraints.I bought this filament
https://smile.amazon.de/gp/product/B07VJZVFJ2/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s01?ie=UTF8&th=1
Post-Printing
Micrsoswitch
The dimensions of the microswitch (black body): 27.8mm x 15.8mm x 9.8mm
the microswitch breaks contact on the positive lead to the LED strip
12V LED strip
functional diagram
How I Designed This
I used Autodesk Inventor for modeling work and printed the parts on Prusa i3 Mk3.
Category: Decor