Creality K1 Wall Anchor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality K1 wall anchor using the honeycomb structure on the back to attach the printer to the wall to reduce vibrations
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
K1 wall anchor using the honeycomb structure on the back to attach the printer to the wall to reduce vibrations. Greatly reduced vibrations for me
Anchors fit snug into the honeycomb structure
Drill and mark the holes on the anchor wall plate
I used a plywood wall stringer/backplane that was screwed into studs. I then screwed the printer anchors into the stringer
Printer can be easily removed and reattached to the anchors
Distance from the wall when anchored is approximately 89mm or 3.5 inches
Printed with ABS
3 walls
25% infill
Note, these are not a full printer wall mount, the printer still needs to be supported by a desk or surface next to the wall