Remix - One-piece base for Filament Dry Box various Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified base and roller for various spools. Supports 42mm-width and larger 77mm-width spools. Roller part 33mm width.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Modified base and roller for various spools. Supports 42mm-width and larger 77mm-width spools. Roller part 33mm width.
This accommodates narrow spools better than the original model as well as the wide Atomic Filament spools.
Recommended Print Settings:
- Print all parts as oriented
- Print axles at 100% infill
- Print the 4 axle covers in TPU for best performance
- Only the base (the main part of this assembly) needs support
- I recommend printing with 4 walls, 6 top/bottom layers, 15-20% infill
- Use brims on the base, spool-tensioner, and ptfe nut
You are also going to need the cereal boxes, 608 (skateboard) bearings (4 per dry box), PC4-M10 Pneumatic “Bowden” Connectors (1 per dry box), M3x10 screw & nut, and a rectangular hygrometer.
If you like my designs and want to send me a tip, you can do so via PayPal….. Thank you and enjoy the models I create.