1 / 6
Stash Box (Print In Place) PIP  [59mm x 59mm] — zdjęcie 1
1 / 6

Stash Box (Print In Place) PIP [59mm x 59mm]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Best if Magnets are used

Ocena
0 / 5
Polubienia
12
Pobrania
68
Wydruki
0
Wyświetlenia
407
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

I needed a box that had 59mm X 59mm inner dim and wanted to test myself with PIP model and this is what i came up with. There are 2 different options; one with PAUSE to place magnets and supports and one without supports or a pause for magnets. A rubber band can be used to close if no magnets are available. The CUT OUT for the magnets are 5mm X 3mm. If you use a HARDENED NOZZLE the magnets may pull free from the print and stick to the nozzle. If you do use a hardened nozzle, a dab of superglue will work. 

ENJOY AND HAPPY PRINTING!!!!!!!!!!!!!!

Tagi