1 / 5
12 Gauge Shotgun Choke Tube Holder / Carrying Case – Dual and Single Versions — zdjęcie 1
1 / 5

12 Gauge Shotgun Choke Tube Holder / Carrying Case – Dual and Single Versions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

12-gauge shotgun choke tube holder with dual and single versions, lanyard holes, and customizable OpenSCAD design

Ocena
0 / 5
Polubienia
1
Pobrania
33
Wydruki
0
Wyświetlenia
242
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I couldn’t find a choke tube holder that seemed practical for field use, so I designed this.

These holders are made to fit 12-gauge shotgun choke tubes. The dual version has holes for attaching it to a lanyard or similar, and both versions work well for Carlson's Choke Tubes for Remington shotguns (around 3" long). If your choke tubes are longer or wider, you can edit the design in OpenSCAD to adjust the size. See the parameters in the screenshot for a starting point if needed.

To strengthen the lanyard attachment points, I used a box modifier in PrusaSlicer to increase the infill to 100% in that area. Another option is to increase the wall/perimeter count to 5 or 6 in the box modifier, which basically ends up being 100% infill anyways. the rest of the model can be normal 2 perimeter w/ 15% infill or whatever and it'll be fine.

Printed in PETG, orange so when I inevitably drop it in the leaves, water, or snow, it'll be easy to find

I printed the lids with fuzzy skin to give it a little grip

https://www.tinkercad.com/things/2VJxnBxjepx-shotgun-choke-tube-holder-dual/edit?returnTo=https%3A%2F%2Fwww.tinkercad.com%2Fdashboard&sharecode=AHRS-xYODNzeUqRlW4RCF1hSbDhu4f7EzAwMS5rqB3M