EUC_FB - Electric Unicycle_FingerBell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a way to have a bicycle bell while riding my unicycle, to alert ped's I was approaching, for safety!
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
I spent a couple weeks working on getting this print dialed in perfectly to fit a Rockbros classic bike bell, which I got on amazon for quite cheap. All while still being able to wear some gloves in the edge seasons of Canada, and not having the bell rotate on my finger.
To attach it to my finger I used a 10.5mm velcro cable tie, i had already, and to assemble everything it requires 3 m2x8 self tapping screws.
If your printer is not very well tuned, this will likely not fit, as I designed the tolerance to be a tight fit to hold the bell well, with minimal extra material. I can make these on demand, but this listing is for the DIY self made version.
I printed with ABS, at 5 walls, which basically makes it 100% infill.
You can purchase the bell used here:
https://www.amazon.ca/dp/B0D9D5ZHFR?_encoding=UTF8&th=1&psc=1