Liczymy pasujące modele…
The angled mount hole centres suit a Ring doorbell generation 2 model with holes centres of 44mm (width) by 87mm (length). 2.0mm mounting hole may need opening up to suit non-OE screws Recommended lay height of 0.2mm (Speed) and 100%…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 70 degree wedge for the Reolink POE Doorbell. It will work with the factory mounting plate. It may work with other doorbells as well. The inside could be cleaned up a bit but that won't be seen once mounted. Feel free to share,…
Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu
Doorbell cover for Ikea home smart shortcut button. https://www.ikea.com/cz/cs/p/tradfri-rychly-vypinac-bila-40467765/ Print with supports, then carefully remove it. Sliced for two colors (black last 4 layers).
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Treelight Repair from a Missing Bell on a lightstrip There is a Fast Raff only 2 layers at 40mm/sek under to stabelise the Translucent prints at 11min while the Gold is at 7min with 150% speed linewidth is ,6mm and layer at 0,3mm
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
NOTE: Scale STLs by 1000x in PrusaSlicer (Weird Bug) Simple interlocking nozzle holders with a snug interconnecting fit, and loose fit between the printed part and the nozzle. Labelled versions (0.8, 0.6, 0.4, 0.25) and unlabeled versions…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
belshill acdemy keyring
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
We needed a button for our drink-randomizer game built using my LED-Drink-Coaster-Puzzle . I had this button, so I designed this box. Here you go :-) Printing any nice material, e.g. Prusament Galaxy PLA support: yes but with bigger…
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
The containers are designed to be used independently or with Gridfinity baseplates . The bottom has magnet holes for magnetized Gridfinity baseplates. The containers when fully loaded are stackable. The battery model number is printed on…
Update 30/07/22; I have Uploaded V3.4, This generates a Single Custom Bellows without throwing any errors. V3.4 also includes an automatic two stage bellows generator. You can now print the bellows in two parts allowing for longer bellows…
Modern Functional Christmas Bell Ornament, great deco for your christmas tree! The bell has a funtional internal clapper part that can make sound when shaking the bell. The clapper prints seperately and simply clicks into the round cavity…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
I explored various models, but none met my angle and design standards. Therefore, I've created a new customizable design using Fusion 360 parameters. I designed this model keeping in mind the strength of the wedge and the space needed for…
Mounting hole template matches the paper one that comes with the doorbell and is an easy and quick print that is a bit more robust than the original one. I found that I needed a bit more spacing between the screw holes which are on the…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
Parametric model for mounting the Unifi G4 Doorbell Pro at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. Rendered a couple of versions as STL,…
Just a Reolink Doorbell Rain Cover. No Supports needed.
This mount allows you to install your Blink Doorbell at a 25 degree angle in a corner. There are 3 different sets of screw holes incase you need to offset the mouting if using existing holes. e.g for wiring.
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
Tilts Reolink doorbell 30 degrees right or left and 15 degrees up or down. Left/Right is from the perspective of the camera. If you want the camera tilted up instead of down, choose the opposite left/right direction. Update: Added v2 to…
I had been just double adhesive taping this thing and realized that since I had an actual working 3D printer I should probably design a mount. I made sure that it can accommodate fairly large USB flash drives and added another 2mm to the…
Bonjour, Je vous propose mon modèle de protection contre la pluie pour la sonnette Reolink Doorbell. J'y ai ajouté un “antivol” en y ajoutant une vis M2x4 à la base de la protection. Contenu: Une plaque murale avec insert pour la…
The protection was created due to the lack of cover from meteorological conditions. The manufacturer recommends covering from rain. For those who use an angle pad, an auxiliary plate must be added between the cover and the angle pad. At…
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
The Ring Doorbell 3 comes with a couple of wedges to adjust the angle of inclination and rotation of the doorbell to point it where you need it. However they provide only a limited range of options. 24 combinations of inclination and…
Needed some space between the Reolink Video Doorbell and the wall to hide extra ethernet cable. Use M4 screw + nut to fasten the metal holder to the spacer. Printed from PETG, with 25% infill. Fixed rain roof.
Presenting the Wyze Doorbell V2 Cover – a minimalistic yet secure solution for enhancing your doorbell's functionality. This 3D-printable cover seamlessly integrates with the original mounting hardware, ensuring a snug fit while…
-------------------------------------------------------------------------------------------------------- These are the current mounts: Horizontal: 5,10,15,20,25,30,35,40,45 Vertical: 5,10,15,20 Dual: 5 Vertical, 10 Horizontal Dual: 5…
I needed a cover for my Ring doorbell to protect it from the rain and also need a wedge to increase my vision of my front door. I adapted this model https://www.thingiverse.com/thing:5240779 to have a wedge shape, and also filled in the…
Hello, I'm adding a remix of a great bell, compared to the first version the upper part has been redesigned so that the halava holds better and the bell can swing. Inside there is a hook for the heart that swings. A new head was created…
25/09/21 As per a request, I have created a siding mount. Check it out here: https://www.thingiverse.com/thing:4974117 19/09/21 As per a few requests, I have now added a 45 degree mount. I've also renamed the design from "Nest Doorbell…
A bell pepper for pretend play, no supports needed. Colors used- Polymaker Polylite Wine Red PLA, Polylite Green PLA and Panchroma Mars PLA
We have a rather large inset doorbell location, so much so that mounting a video doorbell at that location would have a very narrow view with obstructions on both sides. This is a spacer for mounting the Google Nest Doorbell, 2nd…
The total length of the sword as is 130cm (1300mm). There's a hole going all the way through the interior of the rebellion designed for a 115.8cm (1158mm) support rod of 1cm (10mm) thickness. If you want to go that route, you'll likely…
The Aqara G4 Doorbell uses a digital chime and their solution is to adhere it with a sticker to wherever you want. I wanted to mount it near a outlet but also mount it to the power adapter and not stick it to my wall. I found a mount that…
A small single dosing hopper for the Baratza Encore ESP. Most hoppers have no possillity for a bellow, so I designt this one to fit a bellows like that one from AliExpress Put the gasket from the grinder in the hopper first, than the…
this is a 3D-printed canopy remix of the Bell Ranger 206, designed to fit the Tarot 450 pro helicopter Based on the original Bell Ranger 206 by Heli Printed. Full credit to Heli Printed for the base model. Print info: STL files included…
Decorative half-sphere Christmas ornaments with a fine woven structure. The model is available in two variants – a double outer shell with a rotating outer layer or a single solid shell without rotation . The bell is printed separately…
¡Bienvenidos a España! 🇪🇸 Welcome to Spain! This is a recreation of the bell tower or belfry of the church of St Luke the Evangelist in Cheste, Valencia, eastern Spain. It was built in the XVIII century in the baroque and rococo styles,…
Edit: I finally added an SLA version, i've tried it and it's really better for the tiny details, also added a hook to get closer to the real thing. My la poste TGV from LIMA i bought second hand had all it's bellows missing, I got on a…
Since I learned the ECM S64 coffee grinders have a huge retention area (dead space?) filled with old, already ground beans, I wanted to convert it to a single dosing grinder with a smaller hopper. I took the dimensions of the MOAB Mother…
This is a modified version of Ring Doorbell Angle Wedge. It has a slight vertical tilt so that it can be mounted to shingles. Category: Household
I introduce a bellows system for the Rancilio Rocky Doserless grinder. I've been drinking a lot of filter coffee recently. Instead of adjusting my other grinder between espresso and filter settings, I pulled the Rocky Doserless out of the…
A modified version of the QPack Mk 4 Bellows that breaks down into a base with center column, a cap, and a stackable coin to eliminate printing issues caused by unsupported overhangs.
MacialT has made a fantastic barbell collar for us to use, but I and many others found that it causes you to start your workout early, driving a bolt and cutting threads in components to don't need to be threaded. This remix minimizes the…
A barbell keychain printed in parts so no need for a multicolour system. The weights slot on to the bar and there is a clip to keep them securely in place. All parts print without supports. Perfect as a gift for anybody into weight…
Hi I wanted a Bellow for the Ode for a long time and i Tried to print the tpu one and failed few times And Failed. When I found that model I decided to remix it to accept a generic aliexpress bellow I added the Fusion 3D file as well.…
Opted not to do with the shelled design as it actually took up more filament and time to print than doing standard infill Included the f3d file incase you have fusion and want to change the angle (Sketch labeled "Sketch 2) has the angle…
This can be used to replace the ring doorbell button. I find the original one that comes with the doorbell to be flimsy and breaks easily. The size may need to be slightly enlarged on the splicer for your specific ring doorbell.
you only need supports for the pipe very cool print for some gym members, they gona like it
This is a remix of the keychain https://www.printables.com/model/615893-dumbbell-keychain by Erika Heidi (@erikaheidi)
I needed a tall GoPro holder for my mount because on the official CloseTheGap shop, it is 17 euros … so this is a smart economy With the print, you will need a screw and a rectangular bolt to fit with your gps holder and I recommend you…
Easy ruler for reading how much weight is on the Eisenlink Adjustable Dumbbell (https://www.amazon.co.uk/dp/B0BZHHCSFD) The left side of the ruler measures when only the 2kg plates, are used. Read the right hand side when 2 x 1kg plates…
I created a Ring 4 camera mount for my Ring doorbell after mounting it haphazardly to my siding. This ended up warping it slightly and just not allowing for a nice clean install. We also had issues with debris and whatever else ending up…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Gold PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
A lightweight belly clip/holder for STROBON Cree® Standalone strobe light for a DJI Mavic Mini or Mini 2
Fellow Opus Lid for adding a 70mm bellows. Found this specific bellows on shopee and wanted to use it for my fellow opus. https://shp.ee/j8fjh7f
mini dumbell with custom name first thread try
Check the file here: https://a360.co/4fuqKD3
Ring Pro doorbell camera 45 degree mount I wasn't able to find a mount for my Ring Pro doorbell camera that put it at an angle like I needed. Also added a hood to the mount to reduce rain from beading up on the lens and to minimize sun…
A sci-fi blaster. The grip attachment is compatible with AR-15 pistol grips. The main body can be replaced with an air mattress pump. View the attached photos for markings and labels of the air pump I used for my build. Print directions:…
Simple cast iron barbell plates (plain).
When I found out about Trick Laser's nifty ball-cup Kossel arms with plastic barbells to guarantee arm spacing and reduce joint lash (see http://www.tricklaser.com/ ), I was immediately intrigued, but I needed an effector to use them with…
Introducing the Dumbbell Forearm Grip—the unsung hero of your home gym setup. This ingenious attachment seamlessly screws onto one end of a screw-type dumbbell, offering a focused workout for those oft-neglected forearm muscles. No longer…
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 Design Concepts This model of Tinkerbell appears to reimagine her with elements of elegance and whimsy, tracing ethereal forms and a swirling dress made from…
This model allows for 2 barbells to fit perpendicularly together. Good for things like landmine movements but allows you to adjust the height of the lever fulcrum (barbell on rack) for difficulties and movement styles.
My players where struggling with identifying each dice for D&D so I made this to help on the table.
Hello fellow gym members, now you can work out even as you eat your delicious(not so healthy) cookies. I tested this cutter with gingerbread cookies and it turned out great, remember not to make it too thin because the cookie can break in…
This is a mount to screw on the wall and screw the ring doorbell mount on top of it, so you can pass some usb flat cable behind it.
Remixed to suite my mount preferences. Changes from the original: repositioned countersunk screw holes chamfered edging smaller wall base wire routing hole is more accurate to metal mount plate Fusion 360 file included.
PLS FOLOW ME I DON'T MAKE THIS COS IM BORD ITS FOR ME TO MAKE MORE PEOPLE HAPPY
Happy holidays! Here's a set of four baubles in bell shape. The included print profile contains 4 plates, plate 1: set of four plates 2-5: individual bells. Happy printing! Do you like my design? Support me by commenting, uploading…
This is a bellows cap for the Fellow Opus grinder. Each part prints easily in PLA without supports, but make sure to specify enough perimeter layers to make the part solid. It has two pieces that bolt together using a couple of M3x8…
The Gothic Bellpine Cathedral Tree fuses the soul of Christmas with the spirit of Gothic architecture. Shaped like a towering fir tree yet adorned with cathedral arches, hanging bells, and heart-shaped ornaments, this piece transforms the…
Wanted to replace our old intercom system with a ring door bell. Simply remove the old intercom plate. If you want you could hard wire it with the power cables from the intercom. Place the face plate on the adapter and mount your ring…
A dumbbell holder that isn’t limited by the number of weight plates it can support.
Design Concept This model captures Peter Pan and Tinkerbell in a beautifully detailed embrace, reflecting a moment of shared adventure and camaraderie. Purpose It serves as a decorative piece suitable for home or office spaces, aiming to…
The Ring doorbell wedge that is paired with the original doorbell camera was too steep of an angle for my liking. Decided to model my own version with less of an aggressive angle. THIS MODEL WILL ONLY WORK FOR (Pro & Pro2 Models WIRED…
Small signboard for your Blink doorbell to reduce solicitating. Works for normal installation or 25 degrees corner mount. No hardware needed. Write your own letter (Orcaslicer) Select Emboss tool and add a Text object Write your text,…
Print blower in TPU, works best with adaptive layer lines. Overhangs tend to droop causing leaks, watch first ~55 layers carefully for this! Rest of the model prints fine. Nozzle noticeably increases velocity of output, while sacrificing…
Originally printed with PLA and it's been a year and works just fine, I guess PETG or ABS would be better. I printed it with 70% infill to make it more robust. It screws from the back of the ring back plate.
This is an adapter plate that provides 5 degrees of correction for angled mounting surfaces like shiplap siding or similar. This works with the latest generation of Ring Doorbell Cameras (2024 or 2025) that use the little plastic tool to…
Trophy of barbell with and without sign. Its recommended to print sign separately and glue it afterwards. Trofej s činkou s nápisem a bez nápisu. Je doporučeno nápis tisknout zvlášť a požději jej dolepit.
Easy-to-print rack for small neoprene barbell plates (up to 5 kg). Shaped to make the plates self-center.
Source file for the “Potbelly” sci-fi blaster. The grip attachment is compatible with AR-15 pistol grips.
Print with the American flag faced down. Print with normal supports, not tree supports. The supports will come out easy and clean.
I purchased Power Tower Workout Dip Station https://www.amazon.it/dp/B077S1G8FP?ref=ppx_yo2ov_dt_b_fed_asin_title on Amazon and then Pulley Lat Machine but the Tower tends to tip over. I then printed a weight holder so I have both a place…
You will need lock to put inside this case. Something like AliExpress 1005007176654083
This lets you hang a barbell vertically on a horizontal wall corner as shown in the photos.
Mini lego scale barbell and plates. may need to be printed at around 80% scale due to tolerances be careful because its a little breakable
Printed in TPU 95A, bellow fits under the flange of the Funnel for the Air Manager V2 and allows it to seal against a wall.
AlexEnglish, on thingiverse, remixed it and made it better and more compact, please check his model out. Updated model (V2) to work with modern printers (original printer was a Cupcake) and designed to fit modern canning jars.…
I got a nice brass bell with my bike - it mounts as one of the headset spacers. Only trouble is that this means I need to take my hands off the handlebars to ring the bell. Oh, and it's kinda awkward to find the tinger thing. On other…
Sign for a video doorbell to tell people they are being recorded. Good to print with a colour change for the lettering. Can be mounted with M3M3 screw.
