1 / 10

Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

xavierly

@xavierly_555310

Definitive collection of gridfinity stackable battery holders for AA, AAA, C, D, 9V, 18650, most CRxx, LRxx.

Ocena: 4,935 / 5
Polubienia: 969
Pobrania: 5010
Wydruki: 70
Wyświetlenia: 18 805
Oceny: 62

Aktualizacja u źródła: 17 mar 2024

Informacje o modelu

Źródło: Printables
Kategoria: Organizers
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (62)Wydruki i komentarze (Wydruki: 70) (Komentarze: 137)Remiksy (2)Kolekcje (1854)

The containers are designed to be used independently or with Gridfinity baseplates. The bottom has magnet holes for magnetized Gridfinity baseplates.

The containers when fully loaded are stackable.

The battery model number is printed on the outsides and the insides whenever feasible.

The design tries to find the best trade-off between container's capacity, usability, stackability and robustness.

Gridfinity specifies container sizes with atomic increments of 42mm for the width (X) and the depth (Y), of 7mm for height (Z). For instance, a 1x2x4 Gridfinity container has sizes of 42mm x 84mm x 28mm.

For large batteries, the following dimensions are available (1x1, 2x1 and 2x2).

When the battery is too tall, there is also a low clearance version. This is intended to fit in shallow drawers.

1x1 and 2x1 containers can stack on top of most 2x2 containers. If that is not the case, you may use these stackable baseplates by Akio (thanks @avx for suggesting the idea).

For cell batteries, there are 2 container sizes: 1x1 and 2x1.

Let me know:

if you cannot find a container for your battery type,
if you encounter a fitting or usability problem,
if you have any suggestions.

List of containers

Meaning of filename: ModelName - xNN - grid XYZ - vR.r

where:

NN is the capacity
X is the X width gridfinity block count (multiply it by 42mm to get the size)
Y is the Y width gridfinity block count (multiply it by 42mm to get the size)
Z is the height grdifinity block count (multiply it by 7mm to get the size)
R.r is the version number

Battery Type	Capacity	Gridfinity Size
14250 aka CR14250 & ER14250	5	1x1x5
	10	2x1x5
	24	2x2x5
18500	4	1x1x8
	8	2x1x8
	16	2x2x8
18650	2	2x1x4
	4	1x1x10
	4	2x2x4
	8	2x1x10
	16	2x2x10
21700	2	1x1x10
	3	2x2x4
	4	2x1x11
	9	2x2x11
½AA	4	1x1x5
	10	2x1x5
	24	2x2x5
9V	2	1x1x8
	5	2x2x5
	6	2x1x8
	12	2x2x8
A23 aka 1181A, 144, 23A, 23AE, 3LR50, 8F10R, 8LR23, 8LR932, A23S, CA20, EL12, E23A, GP12A, GP23, GP23A, K23A, L1028, LR23A, LRV08, MN21, MN23, MS21, P23GA, RVO8, VR22, V23GA	9	1x1x5
	21	2x1x5
	48	2x2x5
A27 aka GP27A, MN27, L828, 27A, V27A, A27BP, G27A, 8LR732	16	1x1x5
	36	2x1x5
	80	2x2x5
AA	5	1x1x8
	10	2x1x8
	24	2x2x8
AAA	9	1x1x7
	21	2x1x7
	36	2x2x7
AAAA	16	1x1x7
	32	2x1x7
	64	2x2x7
B	1	2x1x4
	2	1x1x10
	3	2x2x4
	4	2x1x10
	12	2x2x10
C	1	1x1x8
	3	2x1x8
	4	2x2x5
	8	2x2x8
CR2 aka 15270, 15266, CR15H270, 5046LC	5	1x1x5
	10	2x1x5
	19	2x2x5
CR123A aka CR123, 123, 123A, 16340, 17345, 2/3A, BR2/3A, CR17345, CR23, DL123A, EL123A, K123LA, L123A, SF123A, VL123A	4	1x1x6
	8	2x1x6
	16	2x2x6
D	1	1x1x10
	1	2x1x6
	2	2x1x10
	2	2x2x6
	5	2x2x10
N aka LR1, MN9100, AM5, GP910A	9	1x1x3
	18	2x1x3
	36	2x2x3