Liczymy pasujące modele…
Box for used batteries 9V battery style Dimensions : 91x60mm, height 160mm Need 4 magnets diam.4 x 2mm Case: Layer height 0.2mm Infill 15% Model color Black then Copper Color change at 105mm Pause at 151.6mm to place the 2 magnets (4x2mm)…
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
Update 08.11.25 : Added CR2450 - Thanks for you Feedback @Oliver_655161 Update 26.05.25 : Added LIR2032 - Thanks for you Feedback @Knocks_3289771 ______________________________________________________________________________________…
Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…
9v Volt Battery Box Holder with 5.5mm Barrel Plug for LED Lights. Battery box is desinged to fit 5x2mm round magnets and a 36.5mm (just the female end) barrel plug. Support is needed where the barrel plug goes. I plan on making some…
Simple quic print to protect your 9V PP3 Batteries. Any material will work provided it is not conductive. Not sure about materials with carbon fiber or other conductive additives
9v battery organizer in the form of a box with a lid for 9 batteries. Check out my other models. Organizer na baterie 9v w kształcie skrzynki z pokrywką. Pomieści 9 sztuk. Sprawdź inne moje modele.
Small and simple holder to stick a 9V battery into. Holder can be glued to a surface to hold a battery. Printed with .25mm layer height and 15% infill with PLA. If you have any questions, feel free to contact me.
I was looking for a 9v battery holder and particularly liked the elegant and simple design by @paulopereira_432393. The problem was that I needed the holder to accept the battery in horizontal orientation so I remixed the original to…
I've been using Perinski's tiered storage box to hold all my bits and bobs, and I wanted a place to also store all my batteries. I found that the 30mm x 8 compartments fitted most battery sizes very nicely, such as AAA and AA, C, and 9v,…
A custom 3D model designed to fully replace the original stand of the AOC Q3279VWFD8 and AOC Q3279VWF.
A basic box with holes for 10x AA, 20x AAA, and 4x 9V batteries with lid. Box and lid have holes for magnets (6x2mm in size) if you so choose. Example shown is PETG, but PLA works just fine as well.
Deutsch: Inspiriert durch das Design von Marzochi ( https://www.thingiverse.com/thing:5389119 ) habe ich meinen eigenen Bateriehalter gemacht. Er ist stabiler und auch stapelbar. Eine einheitliche Grösse macht es möglich auch AA, AAA…
Large Battery Organizer Tray. Holds 40 AA, 40 AAA, 6 9v, and 9 CR2032 batteries.
Once all my other batteries where sorted, what to do with the clunky 9v blocks? and on top, for my few remotes, i do need some spare AAA batteries stored. Lets use the free space of a 4x 9v Block Gridfinity box and store some additional…
Gridfinity with pin 9V battery storage on 4x4 platform
This is custom lower profile battery holder for the Polaroid SX-70 model of cameras. With your power connection coming out of the camera already, solder your 9v connector, buck converter, and switch (if you're using one) to the wires…
passend für: Fujitsu Siemens Lifebook 19V Netzteil Category: Other
This is a small design for an 9v blockbatterie and a switch. I needed one for the iron man light you see on the second picture. I hope you like it. The iron man design is from:…
9V Battery Holder (Holds 2 Batteries) Say goodbye to cluttered battery drawers! This 9V battery holder stores 2 batteries securely, keeping them right where you need them. With compact dimensions of 100mm long, 48mm wide, and 21mm tall,…
Hi, I made a battery holder for my needs, maybe it will work for you too. It is a universal holder for 2x 9V, 8x AA, 12x
A battery terminal protective cap with the features I missed on other models I found: “snap” profile to engage with the positive terminal ridge on the nub for the negative terminal to engage with it terminals completely enclosed relief on…
I remixed a 9v battery carrier with a MOLLE mount tag to create a MOLLE mount for the fellow combat engineers out there💣
Print with 99 walls for best result I will soon do a v2 that wraps around the battery to be more stable and be less finicky
0.5mm 1mm 1.5mm 2mm and 2.5mm spacers for block batterys
Since littleBits doesn't seem to sell their 9V battery clips individually, I decided to model these in Fusion360. Print a pair to hold a 9V battery to a littleBits mounting board. Print with 3x wall, support recommended for the nubs.
Version 2 has these improved features: stronger hinge that is easier to assemble ramped front catch text for multicolor Look in https://www.printables.com/social/261776-brass_ring/collections/224415 for other sizes. These battery boxes…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
I needed a holder for my 9v battery dummy thingy. It was originally intended for a rode mic which I had to modify to open a hole in the back. It was made for my hard 9v adapter and probably doesn't work with flexible connectors. I'll…
TPU enclosure for a USB PD trigger board labeling imprinted. Print in TPU, secure cable and board each with a zip tie.
Battery box tray for 3x 6LR61 aka 1604A aka MN1604 (9V) + 11x AAA + 4x AA + 2x CR2032 Size 74x74mm
Simple cap for a 9V PP3 battery to stop the contacts being shorted in storage. I tried several on Thingiverse but none worked. This design includes a clip in male nub which gives a solid attachment to the battery (or battery clip if you…
Remix of Chris' 9V battery safety cap cover. I extended the number of batteries that can be clipped in to 2 and 4, to keep all batteries in a pack together. Obviously don't use conductive filament!
Another Battery holder for D, C, AA, AAA and 9v batteries
Replace insert with remixed model. Can use remixed blank lid and “9V” lettering. I glued the letters on.
I fixed the pieces so they can fit together may need some force to get them together
Hello I made this 9V battery wire connector because I was frustrated sticking tape to it. Printed with ESUN PLA+ infill 20% No support required.
Capacity: 12x AAA 12x AA 4x C 2x D 6x 9V 8x CR2032 (baby secure packaging) Charger: BONAI universal battery charger
The .3mf file has both the tray and six labels on two plates. I wrote on the labels with a Sharpie and designed them to be replaceable if you ended up with a different size battery that will still fit in the slots. It was designed in…
PWM DC 9-55V 2000W , 0-40A Motor Speed Regulator High Power Linear Speed Control 9V 12V 24V 36V 48V KSD 9700 250V Termostat Ventilator 32, 40, 50
Box for used batteries 9V battery style Dimensions : 91x60mm, height 160mm Need 4 magnets diam.4 x 2mm Case: Layer height 0.2mm Infill 15% Model color Black then Copper Color change at 105mm Pause at 151.6mm to place the 2 magnets (4x2mm)…
Remake of the old Electric 9V Battery Box Small to use 2.54 spacing pins and a normal switch. I made this for my entirely printed monorail. Parts required: 1x switch: https://aliexpress.com/item/32721440534.html 24x pin header pins (link…
I have two versions, one for conductive antistuds with 0.5mm cooper plate and one with cooper tape. To solder all the pins a cut up perfboard works good. Do not print this if you want a 9V cable, just buy one, this is way too annoying to…
Slugs are a slow menace to seedlings, so sowing directly to soil became a non-starter. Ordered some adhesive copper strip but found no suitable box for the 9v battery, so I designed this. Mounting tabs are at the top, and for a plastic…
Battery Holder - No 9v slots - Double CR3032 capacity - Groove to easier grab CR3032 - slimmer bottom (4mm vs 5mm)
Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No
I built this 9v battery box with a switch (hole) and a monitor (hole) to use as a neat power supply to use with the kids, myself on running some of my electronics projects, and so on. The switches I am using:…
A 9V battery dummy for preventing other family members of using the 9V battery department in the battery charger as battery storage (Bad Idea™). The dummy also functions as storage for 2 AA (LR6) and 2 AAA (LR03) batteries. 9V (PP3 /…
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
Follow up solution made up to fix the spaghetti mess I made trying to get this Simple LED light bar setup working, Designed to fit 2X 9V batteries and a switch in the housing on the top rail of Ender 3 series printers but rails could be…
2x2 Gridfinity battery holder for 9v batteries. Includes a coloured label as a separate part for easy painting. The bin is 30mm high when measured from the drawer base. Printed on an MK4s with an MMU3 in Spool3D matte black PLA and…
Gridfinity 9V Battery Storage. It fits a standard 42mm gridfinity grid. It takes up 1x4 grids. 0.4 nozzle Uses 46g of filament and prints in 1h22m.
A simple organizer to keep batteries tidy in a drawer. Fits many batteries.
I'm going deep down the Gridfinity hole after recently discovering it. I organized all my AA, AAA, and C batteries into @KellyEgan's awesom “Gridfinity battery hopper”. I was left with a hand full of 9 volts and a BUNCH of LR44 buttons.…
Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This box is designed for 8 pcs of 9V (6F22, 6LR61) batteries. Thanks for the nice design of the box. Print…
Case (or platform) to put your Arduino una board on. Fits great and use #4 screws to put into place if you want. Use the 9v battery case to power up board.
The most compact and Filament-saving battery organizer . space for: 24x AA, 24x AAA, 5x 9V realy low filament cost only 54g optimal filament: PLA [This Model is already uploaded on my Makerlab Account] https://makerworld.com/en/@morax…
Recommended print settings: Material: PETG Layer height: 0.15mm Nozzle: 0.4mm Infill: 100% Rectilinear Supports: Yes Remix from: Thingiverse thing:2144462
Holders for 9V batteries. Compatible with Zach Freedman, remix of Tactical Grizzly model
I made a mini bike light bar because I did not want to buy one. It also was made to fit a little kids bike/ mini bike. You can make this work with which ever electronics you have. If you used the parts I used you may have to do a bit of…
Multibin top designed to hold (2) 9V PP3 batteries. You might think the slots need to be deeper to envelop more of the battery, but that would require more vertical clearance in order to remove the batteries from the slots. The slot depth…
This optimized and lightweight battery tray is specially designed for RC airplane enthusiasts who prefer using high-capacity 21700 cells. The 7S2P configuration provides 25.9V, ideal for high-performance and endurance flight applications.…
I have not found a good model of 9v battery, so I 've created one myself. 9v Battery Precise Reference Model measured with micrometer. Never printed - used for reference only
Update 08.11.25 : Added CR2450 - Thanks for you Feedback @Oliver_655161 Update 26.05.25 : Added LIR2032 - Thanks for you Feedback @Knocks_3289771 ______________________________________________________________________________________…
DESCRIPTION This is a simple 9V battery holder which can be attached using screws to any of your projects. PRINT SETTINGS Can be printed however you want, but walls may help with clip solidity . DESIGN FILES This model has been designed…
A small holder to keep your mini breadboard and 9v battery semi-securely together so your kids can do first steps in electronics.
Revolving battery organizer for AA, C, AAA, and 9V batteries, prints in two parts, or you can print just the top part if you want it to be stationary. There are two files for the top part one that needs support at the bottom cavity, but…
Added dividers to the 100 x 100 mm catch all trays for AA, AAA, 9V batteries. Examples printed with 0.6 nozzle with 0.2 layer height.
Remixed 9V battery clip with additional smaller screw holes and added hiding cap
Goal: The goal was to create a small battery holder. It needed to hold 4 times as many AA batteries as 9V batteries, so I decided on 16 and 4. Model: I settled on the design pretty quickly. The spaces between the batteries were created to…
another remake but now with 9V also. need some supports printed in 0,2 PLA Standard
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Remix based on the Kirby Fume Extractor by jocoquemx to use a 9v and a 60x60mm fan. here the amazon links to the parts I used: switch 9V Batterie Clip 12V 60x60 fan Activated carbon filter sponge just cut it to a 60x60 rectangle squezze…
Trickle charging 9V NiMH for longer times is not recommended. In my example, I have an input USB-C → switch → boost module → resistor → led → battery slot. Voltage and resistance is set for optimal (lower) current during charging and very…
As the original, the battery and cap are a very tight fit but working them on and off a few times can loosen them up.
🔋 9V Battery Safety Cap – No Shorts, No Surprises! Keep your 9V batteries protected from accidental short circuits with this purpose-built battery cap. Designed for safety, simplicity, and fast printing, this cap is perfect for tossing…
If you liked, don't forgot to drop a like! Stores: 4 x 9 Volt Batteries 4 x AA Batteries 4 x AAA Batteries 4 x CR123a Batteries I created an insert for the parametric box (original link below). I also provided the STLs of the box I…
Assembly and Use No assembly is required, but two flat head #4 (M3) of a length appropriate for your application are required (actually, one screw is probably adequate for most situations). For my application I used two #4 X ½" wood…
Same holder als original. Only added hooks for ikea skadis.
9v battery holder for 21 batterys, will fitt in the bigger tayg boxes.
just a basic mechanical clip to hold a 9V. Hmm, not the best photo, there are hooks on the bottom but that allow you to use a rubber band to strap-in the battery with, see my other 9V battery holder to get an idea.
This is a simple holder for a 9V block battery, to convert a Revue cockpit sound 500 XL. print in 45° angle on the flat side. There is a model with, and one without build-in support.
I needed a storage tray to organize my rechargeable batteries. This one holds 8 AAA, 12 AA and 2 9V batteries. A remix of my other model for holding lithium rechargeables
holder for a 9V battery tester with integrated battery slot to check faulty or weak batteries. Printed in PLA , lightweight and durable. Features two mounting holes for screws to easily fix on a wall, pegboard, or workbench, keeping your…
Printing: You need to print in the orientation shown in the picture below. Use supports as seen in the picture. You need a decently well tuned printer to print the hinge mechanism but it shouldn't be too much of a problem. If at first the…
In order to test my case designs with a battery compartment I have designed this simple model of a 9V battery.
Skadis 9V Battery Holder Hook: https://www.printables.com/model/1121494-skadis-hook
