Vase Mode Battery Holder AA, AAA, 9V and 18650
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This battery holder has many configurations, is easy to print , strong, fast and uses little material.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 330
- Wydruki
- 3
- Wyświetlenia
- 871
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a simple to print strong battery holder for my rechargeable batteries. This design holds many variants, for storing AA, AAA, 9V and 18650 batteries.
They are designed to be printed in spiral vase mode only. They are very fast to print and use very little filament
It is important that these are printed with the following settings to get a successful print:
- Spiral Vase mode.
- Layer height 0.20mm (Including the first layer!).
- Base layers set to 10
- External perimeter width to 0.8mm.
These could be printed in any material, I used PLA and PETG.
Please use the provided 3MF print profiles with all these settings already applied, just change material to suit what you have,
Battery Holder AA - Holds 24 Batteries
Battery Holder AAA - Holds 32 Batteries
Battery Holder 18650 - Holds 24 Batteries
Battery Holder 9V - Holds 12 Batteries
Battery Holder AA-AAA - Holds 20xAA and 20xAAA Batteries
Battery Holder AA-AAA-9V - Holds 16xAA, 20xAAA and 6x9V Batteries
