49 modeli
7 different versions of small parts bins for the famed Harbor Freight portable parts storage cases (#93928). These portable cases are the best you can buy for the money right now compared to the much more expensive Sortimo cases and…
This model is compatible with the lego system.
Wall Art silhouette model of the Jeep Wrangler 392 XR. Adjustable size. I accept model suggestions or ideas you have.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…
This model is compatible with the lego system.
This model is compatible with the lego system.
Its a box to catch plastic waste. Insert 2 magnets into the slots. put 2 more on the outside of the box and attach foam tape to those magnets. Gently push against the side of the printer to align the mounting magnets. Includes design file.
This is a throat plate I created for use on my WEN 3921 Scroll Saw, with much smaller clearance holes. When cutting finely detailed wooden cutouts, sometimes the pieces would snap because they were not supported underneath by the original…
Check my other IKEA designs: Ikea Metod Screw On Leg Extender (402.055.99) NEW Ikea Metod Leg Extender (705.560.67) Why Lost one spacer (part 10036383 or 10039201) for Metod cabinets, didn't want to drive to IKEA for replacement. Designed…
Its just a 3D Scan from a Mercedes ISOFix Blindplug in the W213. Not a perfect, but a working version
Insert for a wen 3923 scroll saw to prevent small pieces from getting lost while cutting. May work on other wen scroll saws. PRINT-- I did(pretty much anything will work) PETG 15% infill
These are divided inserts, not replacements, for the large bins in a Harbor Freight Storehouse 20 bin storage container, number 93928. I found myself needing more of the smaller bins or smaller spaces for short counts on longer screws so…
This is the first step in printing my own bins for the Harbor Freight Storehouse cases (items 93928 & 93929). Right now I have only made the small & medium bins (55x40mm and 110x40mm at the rim) as a proof of concept. I didn't want to…
2 Type holders Pla ,15 % infill
This model is compatible with the lego system.
Provided here are two models, The first file is just the support that can be added to the Fully Assembled 3D Printable Wrench by barspin in your slicer of choice. The second model is an example that I exported from Prusa Slicer. The…
Battery holders for SR41 or LR41 or 384/392 are impossible to find and so here is an adapter that allows for the use of a widely available CR2032 battery holder as long as the electrodes are on top and bottom. This won't work with a…
Replacement of the little thingy that keeps the spacer for the powder measure (if used with a small powder bar) in place. Fusion 360 file is included. Category: Sport & Outdoors
Handle for a table for a great thread winder helper: https://www.printables.com/model/392829-embroidery-swift which is mounted to the top part by pressing. The diameter of the lower screw is 35 mm, and it fits the old type of IKEA FIXE…
Gridfinity tray that i made for the wera 392 handel 028160 ¼ flex bitt / screwdriver
These bins ( http://www.thingiverse.com/thing:1148577 ) were perfect for my HF storage box, but I needed a larger bin for my Pocket-Tactics trays. Works in Harbor Freight 20 Bin storage container (93928 & 62778) and Stanley equivalent.…
A very basic insert design for the Wen 3921 scrollsaw. The one that came with it is a bit flimsy because it has cut outs for both directions of cuts. Step and Fusion360 files for modifications.
It's just a simple copy of the IKEA komplement shelf support/pin 139200. Print 100% for better strength. Please, give me feedback on this because I used only once and has been a while.
This is a mount I made for my car project. It clamps around a bosch electric water pump for a water to air intercooler system for turbocharged or supercharged applications. Bosch pump part# 0392022002 Category: Automotive
I wanted an easy to access hardware box that matched the parts boxes that I use for my 3d printer. Harbor Freight does not offer one in this size/type with more than 20 bins. (Hence, I designed this mod) By replacing the bins that came in…
This keeps the pedal from moving around so much and adds some additional protection against accidental activation. Remove the stock rubber feet and screws, route the cord through the back, align the pedal with the holes and affix to the…
I created this Ender 5 Plus - Lerdge 3920 Optical Endstop for the X Linear Rail. It is setup so that the linear rail mounted gantry itself activates the endstop. It slides right into the sensor. This is printed in 2 pieces. The endstop…
Part Identification Primary Function: Trunk/Boot Trim Element (specifically often identified as the Tailgate/Liftgate hinge cover or lock trim ). Material: Black plastic. Common Locations: * Covers the hinges or latch mechanism on the…
I needed a way to spray the AquaColor because I still had many colors of it. That's why I made this adapter. I printed it with PLA, because the glue did not hold properly, I had to help with some electrical tape ^^ The thread was too…
ORGANIZZATORE GT392 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS Da abbinare con Org GT387 - Org GT388 - Org GT389 - Org GT390 - Org GT391:…
Hello, I drew a cover for the Wondom AA-AB31392 1000W amplifier. There are two versions of the front cover, one is both with the Wondom logo and the other has two holes for LEDs, one indicates the on state and the other LED indicates the…
This is a replacement decal for the WARN solenoid/control box. You can purchase the original emblem online for around $45 CAD , or print your own using this model. The design consists of two parts : White border Red insert Printing…
This was a design for our Zanussi ZDT 6252 dishwasher, the door latch/catch part number 4055283925, but the same part is used in many other compatible models, even from other brands. I've seen Electrolux and AEG just to mention two,…
394 to 392 battery reduction. 392 has bigger capacity...I know..strange :))
Gridfinity bin 3x1x8 for a cheap laser meter Bought it on aliexpress
Bracket to add a PJ392A 3.5mm jack connector to a legacy IIDX cab when converting from GELDJ to native TDJ. The hole is to use the already existing M5 screws at the bottom of the leather front. Mirror model on the slicer to get P1
Replacement for original Lid Striker as mine has spring latch broken off. Use organic supports if possible, printed from PET-G, that should withstand the high temps in the summer.
Endcap for Vaillant ecoTec boilers. Fits the control ports on the exhaust connector. Vaillant part #147392. Use at your own risk, check your national regulations if this part is legal to use. Schraubverschluss für Vaillant ecoTec…
Wandhalterung für Grundig VCP 3929 L Akkustaubsauger inklusive Aufbewahrung für Zusatzdüsen
I wanted an easy to access hardware box that matched the parts boxes that I use for my 3d printer. Harbor Freight does not offer one in this size/type with more than 20 bins. (Hence, I designed this mod) By replacing the bins that came in…
This model is compatible with the lego system.
This was a design for our Zanussi ZDT 6252 dishwasher, the door latch/catch part number 4055283925, but the same part is used in many other compatible models, even from other brands. I've seen Electrolux and AEG just to mention two,…
This is a replacement decal for the WARN solenoid/control box. You can purchase the original emblem online for around $45 CAD , or print your own using this model. The design consists of two parts : White border Red insert Printing…
Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant. This project used an AAP01 as a…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant. This project used an AAP01 as a…
