1 / 10
Adapter for Revell Airbrush (39200) to AquaColor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to spray the AquaColor because I still had many colors of it. That's why I made this adapter. I printed…
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 280
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I needed a way to spray the AquaColor because I still had many colors of it. That's why I made this adapter.
I printed it with PLA, because the glue did not hold properly, I had to help with some electrical tape ^^
The thread was too loose in the first print. But I improved it in the current version (for emergency electrical tape)
Category: DIY