Divided inserts for Harbor Freight 20 bin storage container 93928
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are divided inserts, not replacements, for the large bins in a Harbor Freight Storehouse 20 bin storage…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
These are divided inserts, not replacements, for the large bins in a Harbor Freight Storehouse 20 bin storage container, number 93928. I found myself needing more of the smaller bins or smaller spaces for short counts on longer screws so I created divided inserts. They simulate the medium and small bins and introduce a bin divided along the long axis.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 V3 KE
Rafts:
No
Supports:
No
Resolution:
0.20 mm
Infill:
5%
Filament: any PLA any
Notes:
The infill doesn't matter if you set the walls to 4 and increase the top or bottom solid layer by 1.
I measured the inside of the larger box then created a basic insert with no dividers and 1.5mm walls and bottom. I probably could have gone thinner because these are sturdier than the original bins. I then created a 1.5mm thick divider that was the same length and height of the long axis then did the same for the short axis. I centered each divider in the box individually then included both for the 4-way.
Category: Tool Holders & Boxes