Divided inserts for Harbor Freight 20 bin storage container 93928
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are divided inserts, not replacements, for the large bins in a Harbor Freight Storehouse 20 bin storage…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 69
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
These are divided inserts, not replacements, for the large bins in a Harbor Freight Storehouse 20 bin storage container, number 93928. I found myself needing more of the smaller bins or smaller spaces for short counts on longer screws so I created divided inserts. They simulate the medium and small bins and introduce a bin divided along the long axis.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 V3 KE
Rafts:
No
Supports:
No
Resolution:
0.20 mm
Infill:
5%
Filament: any PLA any
Notes:
The infill doesn't matter if you set the walls to 4 and increase the top or bottom solid layer by 1.
I measured the inside of the larger box then created a basic insert with no dividers and 1.5mm walls and bottom. I probably could have gone thinner because these are sturdier than the original bins. I then created a 1.5mm thick divider that was the same length and height of the long axis then did the same for the short axis. I centered each divider in the box individually then included both for the 4-way.
Category: Tool Holders & Boxes