188 models
Parametric box with lid and internal dividers. Have fun and please post your printed designs! Tips: 0.2mm lip tolerance on my MK4 with 0.4 nozzle is a safe value, but produces loose fitting lid that I was going for with my prints. However…
A sink rack to hold you spunge and accessories on a split sink. The space between the pockets is about 1.6 inches. Printing Print upside down. No supports required at 0.2 layer height. Infill and wall at your discretion. Enjoy! And If you…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…
Hinged Cable Clip V2 Now Available ! Hinged Cable Clip Divided Is your absence of cable management scaring away your relatives and causing turmoil in your relationships with others? I can't help you with that… but this might… Behold the…
Stand for Alexa Echo Dot 4 For the standard version you need support under the belly and the head. Because you could still see, where the support was, I redesigned the model. The divided model only has support on the “inside”, where the…
Also uploaded my 2 x 1 size inserts: https://www.printables.com/model/672541-gridfinity-1-x-2-size-inserts-can-be-closed-indivi [Update 2024.01.01] Added new parts upon request: 1 x 1 x 4, 1 x 1 x 6 and 1 x 1 x 8 Gridfinity inserts with…
This is a from-the-ground-up reimplementation of Zack Freedman's divided Gridfinity boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you can…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-09-29 - Replaced the 1x3x3u x5 bin which wouldn't slice properly 2023-02-04 - Original post using the Gridfinity v5 spec Also see my other…
I remixed the popular "Yet Another Trofast Box" design to include more dividers, as I needed a better storage solution for my son's LEGO collection. These extra dividers will help you organize and separate various items within your IKEA…
I think this is the most needed upgrade for Elegoo Centauri Carbon as it is louder than other printers , especially when printing starts. While this model looked promising, I wanted to avoid support as much as possible. After spending…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-02-04 - Original post using the Gridfinity v5 spec Also see my other Gridfinity Bins: Vase Mode Bins (No Labels) Vase Mode Bins with Labels…
This is a model of the SLS rocket which will be used with the Artemis missions by NASA to bring people to the moon and to reach many new destinations. This model is based on the official NASA model found here:…
Here is my take on a design for a Zyn/Nicotine pouch container. Simple, yet elegant. This design includes a built-in divider for used pouch disposal or keeping a second flavor. Textured ridges around the can/lid provide a nice feel in the…
After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile rectangular bin normally sat, I decided I might as well duplicate the deep…
Gridfinity Divided Bin 2x3x3 2 Large 4 Small Sections.
Since I made the rectangular divided bin that has 4 cavities that fits the Milwaukee Packout Organizer, I was asked to make a rectangular bin that has only three cavities. Here it is. If you like these models, check out some of my other…
Derived from my other model “Divided Gridfinity Boxes" but now have added Finger Scoops for getting small parts out of the boxes easier! Included source code and a random selection of box sizes and divider configurations. #adjust these…
I present to you: MILWAUKEE DIVIDED BIG PACKOUT BOX . Had 2 make this with “original measures”. I think I nailed it x) Still stuff missing from sides what are in original but I don't need those. Tried this first:…
This is a remix of TheForrestFire's card trays that they made for the Lord of the Rings LCG. I own the core set for Marvel Champions, but don't have enough cards to even fill one side of the box using those trays, so I wanted a version…
Folding puzzle map of the Czech Republic divided into regions. You can adjust the size in PrusaSlicer - I adjusted it to 150%. Later I will add the option as a blind map without names. I see the use in education for children in the first…
An improved adapter for the SawStop PCS overarm dust collector. The one that comes with the overarm has a hard 90 degree takeoff that results in mediocre flow to the overarm and reduces flow to the saw as well. This “Divided Wye” design…
Remix of Markus's model. Scaled down in X and Y but retained original Z height. Added a central divider in TinkerCAD. Model printed in Polymaker PolyLite PLA.
Extremely simple remix, I liked the magnet-less boxes made by Plastic Flow, but needed them to be divided further to store my excess collection of small screws collected from fixing/scrapping laptops. I have only printed the 2u version,…
Model for CNC milling machines. But maybe someone will come in handy for 3D printing.
Gridfinity Divided Bin 2x4x3 Off Center 2 Sections.
Gridfinity Divided Bin 2x4x3 2 Large 4 Small Sections.
I added a divider to the 1x1 bin size, and modified Lidfinity to fit with the divider.
This is concept design of Ipad Pro 11 I-gen divided case. Ipad is to large to print this in one piece on my MK3S so I designed this case in two separate parts. Link is fitted quite accurate so if it is to tight it might be good to reprint…
A longer version of the neat base game trays by olivvybee to fit into Marvel Champions expansion boxes. The original dividers still fit. There's around 4mm space in the box between the trays that I don't have a good idea of how to get rid…
Gridfinity Divided Bin 2x3x3 Off Center 2 Sections.
Minecraft Steve. Each file is labled for color to be printed. Joints are a little tough to push together but hold position well when printed at 100% scale. If you would like to help me keep up the good work and make a donation :…
There is an updated Version 2.1 of this model, which uses filament hinges. I recommend trying the filament hinge model over this version, since it is much easier to assemble. You can find the updated version at the link below:…
Printed with 0.32 mm layer height, 0.50 width.
I had some stuff I wanted to put vertically in my Gridfinity drawer, but I didn't like or couldn't use the solutions I found in the Master Set. So here's my rendition of some slotted storage, for all your combs, tiny scissors, and lens…
In the fusion360 file you can specifie all the required paramters to your needs: how many compartments in y direction how many compartments in x direction size in y direction size in x direction z height first layer height wall thickness
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Simple stackable subdivided token tray compatible with the simple token tray by Demokrit . Diameter, height and wall thickness can be adjusted if needed. The source file contains also parameterized body of the original tray, driven by the…
Needed more small compartments for sorting our LEGO bricks and piece. Please find difference between the top and bottom part.
Original Author: https://www.printables.com/es/@3DPrintingJoe_696674 Original Model: https://www.printables.com/es/model/432066-anycubic-kobra-neogo-led-bar In case someone does not have the knowledge to divide the original author's light…
this is a modification of a print that I found eons ago (back when I first started 3D printing) and have held on to since then. This is a versatile print. I took the original, sized it up 30% (grand total size 130%) then, by request of a…
Divided the original box into 3 segments to store my baking ingredients. The dividing walls are 2mm thick. Printed with: Bavaria Filaments PLA Galaxy Silver @195°C on Qidi i-mate S 0.4mm nozzle 0.24mm layer hight 20% infill
The one piece box insert was too big for my printer bed, so I divided into quarters. Now I can print it! Category: Games
Split your bins into smaller storage bins. This model is for a double. Single sub-divider. Other models divide into 1 and 4. Features: no support needed to print. stack on other units place for labels Bump on bottom helps pick up things…
adjusted holes and arm length to fit to the upper right side of the printer. to install it, you have to turn it upside down
These battery holders are just really simple crate type, but with a difference. These were made completely in PrusaSlicer, utilising only primitives from the shape library and adjusting the perimeter and infill options to achieve an exact…
Printed with PLA on a Sovol Sv06 plus
School is starting back in my local area, and I was thinking of items that my kids need. This is a divided pencil box using 10x3 mm magnets (example https://www.amazon.com/dp/B09DYG7GLW the larger size). It uses 8 magnets, but you might…
As much as I like the divided gridfinity boxes for storing screws and nuts etc., it is not easy to empty one compartment without spilling the contents of the other. This simple lid is my solution for a situation like this. As it is…
Standard-sized SPLIT PANS for your Watercolour Palettes! Maybe you can't decide between 2 colours. Or maybe there's a few colours that you don't use often but can't stand to leave out of your palette. These Split pans will give you more…
I love Sortirus's insert, but my OCD would suffer from resources mixed together and since I have Miniature Expansion my workers minifigures are placed in other box, so I added dividers to original holders to keep it separeted. Wooden…
A divided, labeled and stackable bin, 3x2, 6 units high, with 11 compartments. Ideal for little screws, or other tiny stuff.
1x1x10 gridfinity bin with glue-in magnet holes on the bottom. It is divided into four sub-bins. The walls have small hexagonal holes. They turned out looking like circles on mine, though.
A divided, labeled and stackable bin, 3x2, 6 units high, with 12 compartments. Ideal for little screws, or other tiny stuff.
Hex Bin Gridfinity 2x4x5 DIVIDED
Divided the original box into 6 segments to store my packs of spices. The dividing walls are 2mm thick. Printed with: Bavaria Filaments PLA Galaxy Silver @195°C on Qidi i-mate S 0.4mm nozzle 0.24mm layer hight 20% infill
Formula 1 Wall Art divided
Hex Bin Gridfinity 2x3x5 Divided x2
KURETAKE GANSAI TAMBI PANS for your Watercolour Palettes! Now with Dividers! Fit more colours into your palette! The horizontal layer lines which are a result of 3D printing are actually a feature in this case! Your dried paints are less…
TIP: Navigate to "Model Files" below and download just the maps you want (each map is in two pieces). Unique maps highlighting some of the ultimate rivalries across college football, pro football, pro soccer, and even "pro fantasy…
Simple divided dish to hold candy or whatever you want.
This model is based on hexagons with the flat sides measuring 25mm and the overall depth of the model is 113.2mm. You can print a single unit which has 6 hex compartments each, or glue them together to create larger storage units like the…
Overwatch Nevermore Mask split into 2 and 4 parts :)
This is designed to hold sponges, scrub pads and the like on a divided sink. Note that the space to span the divide between the sink bowls is 1 3/8 inches. It is designed to allow the sponges to drain and dry out while keeping them…
This can be printed with or without magnet holes depending on which you like more and how many you need to print the magnet holes are sized for 10mm wide and 2mm thick circular magnets.
A divided, labeled and stackable bin, 3x1, 6 units high, with 6 compartments. Ideal for little screws, or other tiny stuff.
I received my copy of the Vampire the Masquerade: Chapters board game recently, and it's got a LOT of NPCs! The included storage has two spaces for those standees, but that's still 70+ standees that you need to search through to find the…
Quick remix of eclsnowman's great design since I also use the Stanley Deep Pro Organizer for storing MTG decks. Their full bins are great for holding Commander decks stored horizontally, but I also wanted to store standard 60 card decks…
A stylish and functional 3-compartment snack bowl featuring an organic wave pattern on the exterior. This minimalist design is perfect for serving nuts, candies, or small snacks while keeping them neatly separated. The bowl is designed…
Gridfinity 1x4 Divided Hex Bin
The model has zero tolerance. You can adjust it to your needs or leave it as is so that it fits as snugly as possible. Add a few drops of glue for a stronger bond.
It was my first try with the sculpting in Fusion 360. Maybe somebody would like it. Print with supports. Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Yes…
Remix model: 6 segments - divided Gridfinity bin 4x2x11u by: w3rN42 My model has 11 segments. The remaining dimensions are the same as in the original. Thank you very much for sharing the model that I could modify. It made my work much…
Glue these together in different configurations of shapes and colors to fit your space. Recommended glue for PLA is cyanoacrylate (super glue) and for PETG is polyurethane glue (like Gorilla glue).
Simple storage box with 6 compartments for tokens and resources for any board game with lots of pieces or anything else you want to store. Lid slides in and closes securely. Print with zero top and bottom layers and your choice of infill…
Harry Potter Wand Handle Subdivided for more detail. Larger size due to more triangles.
This is one of my first models, it is a simple box divided into 3 sections with a lid that fits snugly onto it.
I added a simple divider in the drawer to allow for storing two different items. I used the same print settings as the original: Layer Height: 0.25 Perimeters: 2
Original models and lids: https://www.printables.com/model/512997-gridfinity-box-with-lid-magnetic I was looking for divided Gridfinity bins with a lid a quick remix made it happen Not yet tested
Selectagon is a fully modular storage system consisting of full and subdivide hexagon drawers they modules are intended to be glued together for a seamless look Category: Organization
Very easy fast to print quarterly divided shallow screw cup with clip. Print the cups with 2 bottom layer, 0.6mm walls, 0.3mm layer height. 15 minutes each at 60mm/s. I can fit all four cups on my Neptune 3's bed printing them one at a…
Gridfinity Redefined (The gridfinity redefined style with the thumbscrew attachment) 1unit x 3unit x 6units - With label, divided sections. Printed 0.3mm layers, 15% infill, no supports needed.
This simple box is intended to be used as a wet pallet to keep your miniature paints wet longer while you work. The divided insert tray can be helpful to keep your color mixing to the areas intended. insert 2 layers of paper towel or one…
These are divided inserts, not replacements, for the large bins in a Harbor Freight Storehouse 20 bin storage container, number 93928. I found myself needing more of the smaller bins or smaller spaces for short counts on longer screws so…
some gridfinity container I needed and remixed from Jdegs
New version Convertible cavalry movement tray 123 - 1234 Cavalry movement tray for TOW. It is divided into 2 sections so it can be printed on printers with a 220 x 220 bed. The attachment system allows assembling the pieces and provides…
I was having trouble getting Fusion360 reinstalled, so I just did some math and added the dividers I wanted to the stl right inside Prusa Slicer. You should be able to move, add/subtract the divider box objects to make your own unique…
A square container with a divider making 4 slots. no supports needed
Alphabet Stencil - Divided into 6 printable stl files to glue together into one large Stencil. Scale is 100% of the original. Category: Office
I recently had the need to add overarm dust collection to my sawstop CNS I decided to go this route : buy the blade guard with dust collection (TSG-DC) because it is a safety element and DIY the rest of the system (tubing, hose…
Divided remix of Divider for Ikea ORDNING utensils holder with more (6) compartments instead of original model with 3 compartments.
DividedC0de is a Roblox UGC Creator and Game Developer known for creating games such as Gear battles, WENDIGO, BYTEZER0.
This is a spacer for the original card tray solution, which lacked a spacer as the designer described. I made a quick ssolution after measuring the dimensions (195.5mm x 4 mm 39mm). It fits perfectly after being printed. The height is…
Wanted to normalize my drawers to one type of front panel so I mimicked the spacing on the original version
GrandFather has created an amazing box organiser system for Ark Nova that has space for everything, but I wanted to separate the partner zoo and university tokens by type to make setup faster. This remix of the token tray splits four of…
Designed to sort long and short silverware in a divided drawer. Current model is 83 mm(~3.25") wide. Let me know if you need different proportions or slots.
Thanks to Heine Sorensen for posting the original drawer model after posting their mod for Were screwdrivers here: https://www.printables.com/model/219770-wera-micro-screwdriver-under-drawer I needed a drawer for coins I use to pay for my…
A divided Box for everything! You can scale it to make it bigger or smaller.
This model is for printing in parts (No AMS), Tolerance is a bit heigh (0.6mm), you may increase contour if you need more accurate fixation. The suspension is much firmer than original design
